Reply to thread

Message

<blockquote data-quote="Rufnek405" data-source="post: 8764097" data-attributes="member: 684007">New 1st time member so this isn&#039;t&nbsp; done correctly I apologize...I&#039;m stumped &nbsp;I recently put a system into my 2018 compass sport.&nbsp; It worked great for about 2 weeks. I wired the entire harness myself that hasn&#039;t had a single issue but 2 weeks ago when I went to leave work I had no power no anything to my amplifier. I went home and tore all the wiring out rewired everything (even more carefully)&nbsp; And it came back on and worked for about 2 days.&nbsp;Then driving on the highway the Bass&nbsp; stopped and my amp went into protection.&nbsp;Since then I have rewired everything from bumper to bumper we can&#039;t find a single problem. The amp stays in protection AS LONG AS ITS GROUNDED.&nbsp; If I take the ground off the amp comes out of protection the still doesn&#039;t produce any sound.&nbsp;It&#039;s a cheap dual amp into a cheap Kenwood 12.&nbsp; Dual&#039;s website says if the red light comes on&nbsp; it&#039;s A) bad ground B) wires&nbsp; touching or c) impedance issue.&nbsp; None of which it seems to be I have checked and checked and checked again. I have a new amp on order but now it&#039;s fact a matter what the hell is going on?!?! Bad ground terminals? Any help is appreciated</blockquote>

[QUOTE="Rufnek405, post: 8764097, member: 684007"] New 1st time member so this isn't done correctly I apologize... I'm stumped I recently put a system into my 2018 compass sport. It worked great for about 2 weeks. I wired the entire harness myself that hasn't had a single issue but 2 weeks ago when I went to leave work I had no power no anything to my amplifier. I went home and tore all the wiring out rewired everything (even more carefully) And it came back on and worked for about 2 days. Then driving on the highway the Bass stopped and my amp went into protection. Since then I have rewired everything from bumper to bumper we can't find a single problem. The amp stays in protection AS LONG AS ITS GROUNDED. If I take the ground off the amp comes out of protection the still doesn't produce any sound. It's a cheap dual amp into a cheap Kenwood 12. Dual's website says if the red light comes on it's A) bad ground B) wires touching or c) impedance issue. None of which it seems to be I have checked and checked and checked again. I have a new amp on order but now it's fact a matter what the hell is going on?!?! Bad ground terminals? Any help is appreciated [/QUOTE]

Verification