Ampli****infiers!!!

[nswartley 5,000+ posts]

Originally posted by snova031 For 2 Brahmas? That would be ~1600 each.

EDIT: and the V900HC is on thezeb for like 600

oh, my bad, its for 2 brahmas. thats decent...

 

[BonusBobo 10+ year member]

for the record, snova, you do know that you don't need 1600W per brahma to reach full excursion, right?

 

[packerfan 10+ year member]

Originally posted by BonusBobo for the record, snova, you do know that you don't need 1600W per brahma to reach full excursion, right?

Hope so...

 

[nswartley 5,000+ posts]

Originally posted by BonusBobo for the record, snova, you do know that you don't need 1600W per brahma to reach full excursion, right?

800w in a 2.79ft^3 sealed box //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[KelBench400 10+ year member]

Two Brahmas are also a 2 ohm load if you hook them to a single amp....or .5 ohms. You can't get a 1 ohm load with two Brahmas together.

I'd recommend the Orion xtrpro 2400...I might be biased though...that's what I bought for my two XXX's. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Randy Savage 5,000+ posts]

I know that brahma's don't need 1600 watts...initially i was gonna send em in the 1k-1200 range, but i wanna know what amps are out there that can give em that much power. And thats why i said around 1200 at 2 ohms, or 2400+ at 1 ohm.

Hey kel, how much did you get the orion for?

 

[KelBench400 10+ year member]

I got the Orion for 500 nib off ebay.

Don't forget though, you want 2400ish into 2 ohms. The Brahmas are dual 2 ohm coils.

 

[Randy Savage 5,000+ posts]

I could do 2 of these...

http://www.ampmanaudio.com/products/details.asp?id=1188

 

[KelBench400 10+ year member]

If you want those REVOs you had better hurry. They are stopping production for a few months. When they run out of the current batch....that's it for awhile. When they come back the price is supposed to jump up alittle.

Also check out ED's nine.1, RE's 35.1, and betteraudios amp.

http://www.respl.com

http://www.edesignaudio.com

http://www.betteraudio.com

 

[Randy Savage 5,000+ posts]

Originally posted by KelBench400 If you want those REVOs you had better hurry. They are stopping production for a few months. When they run out of the current batch....that's it for awhile. When they come back the price is supposed to jump up alittle.

 

Also check out ED's nine.1, RE's 35.1, and betteraudios amp.

 

http://www.respl.com

 

http://www.edesignaudio.com

 

http://www.betteraudio.com

I'm all over the RE 35-1D...that and the ED nine.1 are my top 2 choices right now...

 

[nswartley 5,000+ posts]

Originally posted by snova031 I'm all over the RE 35-1D...that and the ED nine.1 are my top 2 choices right now...

i say you get 2 ed nine.1s....wire each sub mono

 

[abcdefg 10+ year member]

Originally posted by snova031 I could do 2 of these...

http://www.ampmanaudio.com/products/details.asp?id=1188

i wouldnt even fool with ampman they have been a pain in the a** for me

 

[Randy Savage 5,000+ posts]

Originally posted by nswartley i say you get 2 ed nine.1s....wire each sub mono

Thats looking like the best alternative...it'll be right around 600 for both of those, tahts what I'm lookin to spend on amps.

 

[nswartley 5,000+ posts]

Originally posted by snova031 Thats looking like the best alternative...it'll be right around 600 for both of those, tahts what I'm lookin to spend on amps.

i say go for it bro