Reply to thread

Message: <blockquote data-quote="pushak513" data-source="post: 7386816" data-attributes="member: 634366"><p>the head unit is a kenwood  KDC-BT648U and yes I am running RCA's. the amp is basically set at 0 on everything except the 2 dials on the end. (obviously new at this ) but when you adjust those 2 dials it increases the volume but causes the distortion. if both dials are turned to 0 the headunit can be on 35 and you can hardley hear anything..like theres no output. I want to get this adjusted before I hook the subs up so I can try to get a good even sound with no distortion out of the 6.5 and the tweets and all the bass from the subs. All that without having to max out the volume on the head unit //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif</p></blockquote><p></p>

Top