Reply to thread

Message: <blockquote data-quote="jerseystyle1" data-source="post: 727154" data-attributes="member: 558884"><p>You are right that an amp would only see the same final impedence but what he has to keep in mind is what the amp is rated at.  A mono amp that is rated at 1ohm can take a 1ohm load but a 2 channel amp rated at 1ohm can only take a 2ohm (bridged) load.  On multichannel amps the rating is usually for stereo operations.  You have to X2 the rating when dealing with a bridged Mono setup.</p></blockquote><p></p>

Top