Reply to thread

Message: <blockquote data-quote="audioatg" data-source="post: 5447205" data-attributes="member: 570057"><p>You can test the amp for output. disconnect the speaker wires. And get a DMM set it to ac voltage and check to see If there is any signal coming out of the amp when you are playing the radio or CD. Also check your grounds and Check to see If you have voltage at the positive posts on the amp. I have seen an amp have good ground and voltage at turnon for the amp and everything lights up but not voltage at positive terminal on the amp.</p></blockquote><p></p>

Top