Reply to thread

Message: <blockquote data-quote="biggtattoo" data-source="post: 8818603" data-attributes="member: 687172">Thank for the reply I have a second question with this apm I was planning on running a OSW8D4 which is 1500 watts max and 350 rms I was planning on wiring the sub at 8 ohms and bridge on channels 3 and 4 so the amp won't over power the sub and was also wanting to run  some 6.5 speakers which are 4 ohms and 300 watts max and 70 watts rms so can I wire them in series for a 8 ohm loud so the amp won't over power them and bridge them to channels 1 and 2 would this configuration work any info would be greatly appreciated and thank you in advance </blockquote>

Top