Reply to thread

Message: <blockquote data-quote="doox00" data-source="post: 7717074" data-attributes="member: 608758">I have a mono 1000 watt alpine amp bought used off the forums here a couple months ago.  I rarely play it loud and never push it to its extreme.  Powering 2 10" dayton audio ho's in ported box.  The last couple weeks it just cuts off.. meaning I turn the stereo on, works for 10-30 seconds and then nothing from the subs, the amp is still powered on though.  If I turn the stereo off and back on it may come back on again for 10-30 seconds then off..  Once in awhile it will come back on for a few seconds too on its own.  I have checked wiring, all is good.  I hooked up my old 500 watt mono alpine amp and that is working just fine, ideas what to look for in the amp to see what might be the problem?thanks all</blockquote>

Top