Reply to thread

Message: <blockquote data-quote=".::DuD3::." data-source="post: 1999505" data-attributes="member: 557279"><p>no youd have to do it either in 2ohms or 4ohms.  and if you are using coaxials which i'm guessing, you could wire them to 2ohms, but youd have to use that other channel at 2ohms also.  so if you run your speakers at 4ohms, you have to run the other channel at 4ohms, same for 2ohms and 1ohm ect.</p></blockquote><p></p>

Verification

Top

Menu