Reply to thread

Message

<blockquote data-quote="MacDre" data-source="post: 3693152" data-attributes="member: 584105">Alright, so I have a 1994 tercel and the audio system is completely stock (crap). So over the past few weeks I&#039;ve been buying stuff for a new system. So far I have a new alpine deck, 4&quot; alpine speakers (front doors), and 6.5&quot; alpine speakers (rear). So now I&#039;ve hit a snag. I&#039;m not sure if I want two 10&quot; subs or two 8&quot; subs. I want the 10&#039;s but I don&#039;t want my car to rattle down the street lol.But I&#039;ve found what I think is a pretty good deal and I can get two Alpine SWS-1023D for about $160.The specs are as follows:* 900 watts max output* 300 watts RMS (150 per coil)* 10&quot; sub* Extra reinforced pulp cone with aluminum finish (Rev-lar made for long lasting sub)* 3/4&quot; rubber surrounds* dual 2 ohm voice coils (you can run at 1 or 4 ohms) (2 subs @ 2 ohm or .5 ohm)* stamped steel basket* frequency response 30-700 Hz* sensitivity 84 dB* top-mount depth 4 3/8&quot;* sealed box volume: 0.65-1.5 cubic feet* ported box volume: 1.0-1.75 cubic feetSo my question is this should I get those two 10&#039;s for a 1994 tercel, AND PLEASE recommend amps to power the things.</blockquote>

[QUOTE="MacDre, post: 3693152, member: 584105"] Alright, so I have a 1994 tercel and the audio system is completely stock (crap). So over the past few weeks I've been buying stuff for a new system. So far I have a new alpine deck, 4" alpine speakers (front doors), and 6.5" alpine speakers (rear). So now I've hit a snag. I'm not sure if I want two 10" subs or two 8" subs. I want the 10's but I don't want my car to rattle down the street lol. But I've found what I think is a pretty good deal and I can get two Alpine SWS-1023D for about $160. The specs are as follows: * 900 watts max output * 300 watts RMS (150 per coil) * 10" sub * Extra reinforced pulp cone with aluminum finish (Rev-lar made for long lasting sub) * 3/4" rubber surrounds * dual 2 ohm voice coils (you can run at 1 or 4 ohms) (2 subs @ 2 ohm or .5 ohm) * stamped steel basket * frequency response 30-700 Hz * sensitivity 84 dB * top-mount depth 4 3/8" * sealed box volume: 0.65-1.5 cubic feet * ported box volume: 1.0-1.75 cubic feet So my question is this should I get those two 10's for a 1994 tercel, AND PLEASE recommend amps to power the things. [/QUOTE]

Verification