Reply to thread

Message

<blockquote data-quote="google123" data-source="post: 5106188" data-attributes="member: 572007">hu: kenwood excelon x-492amp: eclipse xa-1000when i connected the wires from the hu to the factory harness, i matched all colors just like the instructions stated.&nbsp; one of this was a blue/white wire that connected to a blue/white wire on the factory harness.&nbsp; stereo works fine.&nbsp; today i wired an eclipse amp and used the blue wire from the hu to the amp as the remote turn-on wire.&nbsp; the amp will not turn on.&nbsp; i checked the power/ground/fuses and everything is fine.&nbsp; then i changed the source on the hu to tuner and the amp powered on and powered the kicker subs just fine.&nbsp; then i changed the source back to cd and the amp powered off&nbsp; //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif.&nbsp; what the hell.&nbsp; how can i make sure the amp stays on no matter what source the hu is set to?????????????? thanks..</blockquote>

[QUOTE="google123, post: 5106188, member: 572007"] hu: kenwood excelon x-492 amp: eclipse xa-1000 when i connected the wires from the hu to the factory harness, i matched all colors just like the instructions stated. one of this was a blue/white wire that connected to a blue/white wire on the factory harness. stereo works fine. today i wired an eclipse amp and used the blue wire from the hu to the amp as the remote turn-on wire. the amp will not turn on. i checked the power/ground/fuses and everything is fine. then i changed the source on the hu to tuner and the amp powered on and powered the kicker subs just fine. then i changed the source back to cd and the amp powered off [IMG]//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif[/IMG]. what the hell. how can i make sure the amp stays on no matter what source the hu is set to?????????????? thanks.. [/QUOTE]

Verification