Reply to thread

Message

<blockquote data-quote="Heavypick" data-source="post: 7294744" data-attributes="member: 632397">Yesterday I got a new sub (Pioneer 10in 200 watt RMS) because my others stopped working (Lightning Audio 10in, 100 watt RMS), and I installed it into what I already had. Thought it&#039;d just work, but I guess something went wrong with it and now every time I turn it on, I can&#039;t raise the level on the amp past the 4 (it starts on 6 and goes to 0.3V? I don&#039;t really understand it) but before the amp was on about 1 (2 o&#039;clock) and the bass boost (40hz and below) was on about 5. Also I can&#039;t raise the bass boost at all with the V level on 4. The amps a Sony XMZR1252 2/1 Channel ZR Series Amplifier. (it&#039;s either clipping or not getting enough power through the line, I THINK, I hooked up a battery charger to the car while running only accessories and it still cuts out, the light on the amp flickers as well when it &#039;clips&#039;)How do I stop the clipping?Sorry if this is confusing.</blockquote>

[QUOTE="Heavypick, post: 7294744, member: 632397"] Yesterday I got a new sub (Pioneer 10in 200 watt RMS) because my others stopped working (Lightning Audio 10in, 100 watt RMS), and I installed it into what I already had. Thought it'd just work, but I guess something went wrong with it and now every time I turn it on, I can't raise the level on the amp past the 4 (it starts on 6 and goes to 0.3V? I don't really understand it) but before the amp was on about 1 (2 o'clock) and the bass boost (40hz and below) was on about 5. Also I can't raise the bass boost at all with the V level on 4. The amps a Sony XMZR1252 2/1 Channel ZR Series Amplifier. (it's either clipping or not getting enough power through the line, I THINK, I hooked up a battery charger to the car while running only accessories and it still cuts out, the light on the amp flickers as well when it 'clips') How do I stop the clipping? Sorry if this is confusing. [/QUOTE]

Verification