Alpine MRV-1507 Tweek it for best performance

dnk1998

Junior Member
Ok

I have the MRV-1507 hooked up to two type r 12s. I have an Alpine head unit. I want to know if anyone can tell me what to set the gain and everything to on the amp. Please let me know if you are familar with this amp. I want to get the best out of it. Thanks

//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 
The traditional way to set your gains is to have your HU level at 3/4. Have the gain set all the way down, then slowly turn it up until the subs begin to distort. From that point turn the gain down 1/8th to a 1/4 turn so that no distortion is present if the HU is at 100%.

 
yea what he said... maybe you dont have to back down 1/8 to 1/4 turn. that may be a little too much. just back off until it sounds undistorted.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

dnk1998

Junior Member
Thread starter
dnk1998
Joined
Location
Jacksonville,FL
Start date
Participants
Who Replied
Replies
2
Views
874
Last reply date
Last reply from
imral3
561786595_18427607485102160_7010259965928918509_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0
561583216_18427455586102160_8141545757991593433_n.jpg

just call me KeV

    Oct 9, 2025
  • 0
  • 0

New threads

Top