First off I have an mrp-m1000 that I got in a trade. NO ENDCAPS The guy said it had no output and thought the rca's were bad. It would power on but not output. I expected it to be 25-50 to get fixed.
I took it to Amprepairman to get fixed. He said it would power on but the power light flashed. He tested it and said it wasn't the rca's it was one whole side of the amp. He said the newer digital mono amps have two sides paralled for power.
When he Repaired it he went ahead and changed fets....etc on both sides to match and be more reliable.
Physically I would give it a 9/10
I want $175shipped
1000Wrms @ 2ohm
600Wrms @ 4ohm
Next I have an Alpine V12 5channel amp. Model MRV-F353
8.5/10 Physically
Needs touched up with black or something. Has a few little nicks
$135shipped
MANUAL
http://vault.alpine-usa.com/products/documents/OM_MRV-F353.PDF
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20
kHz)
Per channel into 4 ohms
(CH1 – CH4) .............................. 30W, 0.08% THD
Per channel into 2 ohms
(CH1 – CH4) ................................. 40W, 0.3% THD
Bridged into 4 ohms
(CH1 – CH4) ................................. 80W, 0.3% THD
Power Output: RMS Continuous Power (at 12.0V, 20 Hz)
(CH5) 4 OHMS ..................................... 100W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
Per channel into 4 ohms
(CH1 – CH4) ................................ 50W, 0.08% THD
Per channel into 2 ohms
(CH1 – CH4) .................................. 60W, 0.3% THD
Bridged into 4 ohms
MRV-F353 (CH1 – CH4) ............................... 120W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz)
4 ohms
(CH5) ..................................... 150W, 0.3% THD
__________
___________________
_______________________________
_____________________________________________
Thanks,
Curtis
I took it to Amprepairman to get fixed. He said it would power on but the power light flashed. He tested it and said it wasn't the rca's it was one whole side of the amp. He said the newer digital mono amps have two sides paralled for power.
When he Repaired it he went ahead and changed fets....etc on both sides to match and be more reliable.
Physically I would give it a 9/10
I want $175shipped
1000Wrms @ 2ohm
600Wrms @ 4ohm
Next I have an Alpine V12 5channel amp. Model MRV-F353
8.5/10 Physically
Needs touched up with black or something. Has a few little nicks
$135shipped
MANUAL
http://vault.alpine-usa.com/products/documents/OM_MRV-F353.PDF
Power Output: RMS Continuous Power (at 12.0V, 20 Hz to 20
kHz)
Per channel into 4 ohms
(CH1 – CH4) .............................. 30W, 0.08% THD
Per channel into 2 ohms
(CH1 – CH4) ................................. 40W, 0.3% THD
Bridged into 4 ohms
(CH1 – CH4) ................................. 80W, 0.3% THD
Power Output: RMS Continuous Power (at 12.0V, 20 Hz)
(CH5) 4 OHMS ..................................... 100W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz to 20
kHz)
Per channel into 4 ohms
(CH1 – CH4) ................................ 50W, 0.08% THD
Per channel into 2 ohms
(CH1 – CH4) .................................. 60W, 0.3% THD
Bridged into 4 ohms
MRV-F353 (CH1 – CH4) ............................... 120W, 0.3% THD
Power Output: RMS Continuous Power (at 14.4V, 20 Hz)
4 ohms
(CH5) ..................................... 150W, 0.3% THD
__________
___________________
_______________________________
_____________________________________________
Thanks,
Curtis
Last edited by a moderator:
