Reply to thread

Message: <blockquote data-quote="ChaseinBass" data-source="post: 8459030" data-attributes="member: 655848"><p>Maybe like the voltage  sense wire that we are putting the diode on ? My stock alt is a 4 pin connector and only uses two wires one going to ignition hot source and one to output post and thats stock factory wiring and stock alt keeps my batterys at 14.2 or so and when I switch on the ignition feed two two stereo alts I charge 14.8-15.2 but thats with the diodes.</p></blockquote><p></p>

Top