Reply to thread

Message

<blockquote data-quote="CanariCaddy" data-source="post: 8750909" data-attributes="member: 683338">Hi all!I&#039;m new here and looking for some advanced pointers/tips/advice on my 6th order wall build.vehicle: 2013 VW caddy cargo maxiWoofers: 8 excursion ssx 15 D2 (1500RMS each)Power: 2 excursion HXA20K at .5 ohms each (hopefully around 24KW RMS)Enclosure type: 6th orderRear tuning: 24hzRear net vol. : about 960LFront tuning: T.B.D. (around 50-55)Front net vol.: about 720LSo now the questions <img class="smilie smilie--emoji" loading="lazy" alt="😳" title="😳" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f633.png" />:- Will there be a big difference in the woofers &quot;loading&quot; against eachother (thus giving different excursions)? Compared to the ones who are on an angle? Inside of Baffle - &gt; wall = 34cm wooferface -&gt; wooferface = 40cm- Will the angled part act like a flanged port end?- Will this design result in any gain for the low frequenties.WinISD can only account for so much and building a 6th order or a wall for that matter is new for me. All volumes and port length are based of what winISD has put out. Any help is much appreciatedPLEASE SEE ATTACHED PICTURE OF MY DESIGN <img class="smilie smilie--emoji" loading="lazy" alt="😊" title="😊" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f60a.png" /></blockquote>

[QUOTE="CanariCaddy, post: 8750909, member: 683338"] Hi all! I'm new here and looking for some advanced pointers/tips/advice on my 6th order wall build. vehicle: 2013 VW caddy cargo maxi Woofers: 8 excursion ssx 15 D2 (1500RMS each) Power: 2 excursion HXA20K at .5 ohms each (hopefully around 24KW RMS) Enclosure type: 6th order Rear tuning: 24hz Rear net vol. : about 960L Front tuning: T.B.D. (around 50-55) Front net vol.: about 720L So now the questions 😳: - Will there be a big difference in the woofers "loading" against eachother (thus giving different excursions)? Compared to the ones who are on an angle? Inside of Baffle - > wall = 34cm wooferface -> wooferface = 40cm - Will the angled part act like a flanged port end? - Will this design result in any gain for the low frequenties. WinISD can only account for so much and building a 6th order or a wall for that matter is new for me. All volumes and port length are based of what winISD has put out. Any help is much appreciated PLEASE SEE ATTACHED PICTURE OF MY DESIGN 😊 [/QUOTE]

Verification