Reply to thread

Message

<blockquote data-quote="RoLLaxPhile" data-source="post: 2762128" data-attributes="member: 572952">I&#039;m trying to figure out how to wire an active setup. And it&#039;s driving me nuts right now. I&#039;m having some stuff in tomorrow and I just want to know how to wire it properlyI&#039;m gonna have it run off a P880PRS HUVGA 400.2 for Cal 25 Silk Tweeters Highpass @ 3khz at 12dbVGA 800.2 for Hertz HV165L Midbass Bandpass @ 2khz at 12db / 80hz at 12dbVGA 1600.2 for Stereo Integrity Mag Lowpass @ 34hz at 12dbHow do I properly run the RCA&#039;s from the 400.2 and 800.2 to the HU? Do I run the input RCAs from the tweeter amp to the Front Preout RCAs on the HU and the midbass amp input RCA&#039;s to the HU&#039;s Preout rear?Or do i use a 1M2F RCA connector and plug the input RCA tweeter and midbass amp RCA left into the 1M2F and then plug that on the HU&#039;s Front Left RCA Preout? Same with the other right side?</blockquote>

[QUOTE="RoLLaxPhile, post: 2762128, member: 572952"] I'm trying to figure out how to wire an active setup. And it's driving me nuts right now. I'm having some stuff in tomorrow and I just want to know how to wire it properly I'm gonna have it run off a P880PRS HU VGA 400.2 for Cal 25 Silk Tweeters Highpass @ 3khz at 12db VGA 800.2 for Hertz HV165L Midbass Bandpass @ 2khz at 12db / 80hz at 12db VGA 1600.2 for Stereo Integrity Mag Lowpass @ 34hz at 12db How do I properly run the RCA's from the 400.2 and 800.2 to the HU? Do I run the input RCAs from the tweeter amp to the Front Preout RCAs on the HU and the midbass amp input RCA's to the HU's Preout rear? Or do i use a 1M2F RCA connector and plug the input RCA tweeter and midbass amp RCA left into the 1M2F and then plug that on the HU's Front Left RCA Preout? Same with the other right side? [/QUOTE]

Verification