Reply to thread

Message

<blockquote data-quote="bumpin buick" data-source="post: 6115613" data-attributes="member: 578001">Tuned &quot;higher then hell&quot;? 38hz? And the enclosure you guys used was what 32-34hz? Guess I dont see that being really high. I consider 50-60hz high. 38hz for an SPL build is pretty low and it allowed me to range from 70hz to the mid 20s with no problem.Im sure if you&#039;d like John will let me beat on a sub for a week or two. I dont feel that will be relevant though because I pushed it as hard as I ever would for a few hours, the TS parameters showed little to no change at all, so its not like the material is being worn down or strength is dissipating.Im not a frequenter of CAF but I know on other sites, with other people using AE subs, I have not heard of issues. Also it sounds as if there have been three known subs that have blown, am I correct? Also how many owners? To my record it is just you two. There are more users on here that have used AE for that, and not had any problems. Not really sure what more you expect from this discussion. I did the tests that were blamed for the subs failure, the sub clearly did not fail... its over and done with. There is nothing more for you to prove here, and only more reasons we can prove why the sub failed on you two.</blockquote>

[QUOTE="bumpin buick, post: 6115613, member: 578001"] Tuned "higher then hell"? 38hz? And the enclosure you guys used was what 32-34hz? Guess I dont see that being really high. I consider 50-60hz high. 38hz for an SPL build is pretty low and it allowed me to range from 70hz to the mid 20s with no problem. Im sure if you'd like John will let me beat on a sub for a week or two. I dont feel that will be relevant though because I pushed it as hard as I ever would for a few hours, the TS parameters showed little to no change at all, so its not like the material is being worn down or strength is dissipating. Im not a frequenter of CAF but I know on other sites, with other people using AE subs, I have not heard of issues. Also it sounds as if there have been three known subs that have blown, am I correct? Also how many owners? To my record it is just you two. There are more users on here that have used AE for that, and not had any problems. Not really sure what more you expect from this discussion. I did the tests that were blamed for the subs failure, the sub clearly did not fail... its over and done with. There is nothing more for you to prove here, and only more reasons we can prove why the sub failed on you two. [/QUOTE]

Verification