Reply to thread

Message

<blockquote data-quote="johnnyfive" data-source="post: 2061063" data-attributes="member: 569977">I have had a few systems&nbsp; over the years, and a couple of decent setups.&nbsp; But never anything remotely near &quot;high end&quot;But am finnally making decent money, and just got a car that i feal is worth a quality install.Planning out the install so far i have come&nbsp; up with:HU:&nbsp; Pioneer Premier DEH-P880PRSFRONT STAGE:&nbsp; Boston pro 60&#039;scomponent amp: undecided/unconcerned at&nbsp; this pointSUB AMP:&nbsp; Hifonics XX-Hercules&nbsp; rated 2000w@1 \ 1300w@2SUB: undecided/very concerned at this point //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gifThe thing is that i want to make a custom fiberglass box, and have about 2.5ft^3, can streatch to almost 3 if i really need to(or can go under by any amout).And i need to fit a single 12 in there that will really wang hard, but still hold some decent quality.&nbsp; I have been looking at both the TC3000 and the SI MAG, but can not decide between the two of them.For the power I plan on using (or other amp posible, for aproximetly $500-600), sealed or slot ported(only have aporximetly 9x4x10&quot;&nbsp; widthXheightXlength to work with for a port)I can build anything, just dont know how to engineer a box properly &amp;gt;Any recomendations/coments/criticisms of any&nbsp; aspect of&nbsp; this setup are welcome, and would be appreciated, especially as far as the sub goesor if you have a recomendation of another quality sub that may work well for me in the $500 range (anything that will get low and loud, aswell as staying fairly musical)sorry for the novel, just hope i provided enough information to get some feedback //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif&nbsp; and&nbsp; if your curious i drive a 2007 Toyota Yaris SedanIf you would like more information, please just ask //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="johnnyfive, post: 2061063, member: 569977"] I have had a few systems over the years, and a couple of decent setups. But never anything remotely near "high end" But am finnally making decent money, and just got a car that i feal is worth a quality install. Planning out the install so far i have come up with: HU: Pioneer Premier DEH-P880PRS FRONT STAGE: Boston pro 60's component amp: undecided/unconcerned at this point SUB AMP: Hifonics XX-Hercules rated 2000w@1 \ 1300w@2 SUB: undecided/very concerned at this point [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] The thing is that i want to make a custom fiberglass box, and have about 2.5ft^3, can streatch to almost 3 if i really need to(or can go under by any amout). And i need to fit a single 12 in there that will really wang hard, but still hold some decent quality. I have been looking at both the TC3000 and the SI MAG, but can not decide between the two of them. For the power I plan on using (or other amp posible, for aproximetly $500-600), sealed or slot ported(only have aporximetly 9x4x10" widthXheightXlength to work with for a port) I can build anything, just dont know how to engineer a box properly > Any recomendations/coments/criticisms of any aspect of this setup are welcome, and would be appreciated, especially as far as the sub goes or if you have a recomendation of another quality sub that may work well for me in the $500 range (anything that will get low and loud, aswell as staying fairly musical) sorry for the novel, just hope i provided enough information to get some feedback [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] and if your curious i drive a 2007 Toyota Yaris Sedan If you would like more information, please just ask [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification