Reply to thread

Message

<blockquote data-quote="Blackout67" data-source="post: 8909475" data-attributes="member: 683415">Yea im not really set on anything in particular really. Just wanted to see what other pipe experience with IB is like and if itd be worth it. Im not opposed to going port, sealed, IB or whatever I just want it to sound good and be efficient and cost effective. A sheet of MDf is the same price no matter what box im gonna be building. So really the defining things would be woofer price, which what im seeing here is that IB drivers are going to be pricey and if im doing a build im going to do a build I want it to be the best driver I cam get for that application within my budget and IB subwoofers dont align with that.Here&#039;s another question: I was designing a ported box with aeroports and I was looking at a single larger port vs 2 smaller port for a 12 inch enclosure. I was gonna use either a single 4 inch aero or 2 3 inch aero. Now the main advantage ive seen bigger ports is reducing port noise. So the way i see it, two 3 inch ports has more area than a single 4 inch port. But from what ive read on forums, the port noise would be too high because the ID is 3 inches. But there&#039;s 2 of them so surely it would equate to lower port velocity right? Could someone explain that to me</blockquote>

[QUOTE="Blackout67, post: 8909475, member: 683415"] Yea im not really set on anything in particular really. Just wanted to see what other pipe experience with IB is like and if itd be worth it. Im not opposed to going port, sealed, IB or whatever I just want it to sound good and be efficient and cost effective. A sheet of MDf is the same price no matter what box im gonna be building. So really the defining things would be woofer price, which what im seeing here is that IB drivers are going to be pricey and if im doing a build im going to do a build I want it to be the best driver I cam get for that application within my budget and IB subwoofers dont align with that. Here's another question: I was designing a ported box with aeroports and I was looking at a single larger port vs 2 smaller port for a 12 inch enclosure. I was gonna use either a single 4 inch aero or 2 3 inch aero. Now the main advantage ive seen bigger ports is reducing port noise. So the way i see it, two 3 inch ports has more area than a single 4 inch port. But from what ive read on forums, the port noise would be too high because the ID is 3 inches. But there's 2 of them so surely it would equate to lower port velocity right? Could someone explain that to me [/QUOTE]

Verification