91 GMC Sonoma/reg cab/2wd/5spd

[SethPhillips 5,000+ posts]

thinking about saleing my truck... 91 GMC Sonoma reg cab 2wd 5 speed, 76k

im the 2nd owner... it's been lowerd 6'' in the front, w/ lower control arm's, spindal's and springs... 8'' in the rear with leaf spring's and blocks... door handles are shaved. you can open them with a button between the bad and cab or on my viper 79000 2 way...craiger 15'' rim's with low pro tires.. tinted, over $400 in dynamat, did the door's, floor, firewall, and back cab.. and headliner. custom interior with honda civic buckets. run's like a champ!! all black interior... need's paint and light body work.. i have pic's will post later....

how mutch you think i could get out of this thing???

Click to read more...

 

[GenderBender]

Good luck saleing it.

 

[SethPhillips 5,000+ posts]

Don't forget to mention that the bed is missing. I seen yo pix from before.

the bed is back on..... or else i would have said it's not...

all the truck need's right now as we speak is. exhaust from the cat back... tailgate... and rear brake line.( from the rear axle T off to brake drums).. witch i am slowly but surely getting..... just as is right now, that is what is missing...

 

[97gp 5,000+ posts]

Pictures?

 

[xplicitACTS 10+ year member]

pics condition?

 

[SethPhillips 5,000+ posts]

Pictures?

pics condition?

i have a shit load of detaild pics of the truck and all that has been done to it...( will post when i get home!)

right now it just need's light body work and paint, the condition is great! other then it need's paint. runs great and has awsome throttle response...

i allso have record of all service's ( oil changes, tune ups, ect) since they day it was bought in 1990...

allso if you want to do a lemon check here is the vin #

vin#1gtcs14r9m2561135

 

[97gp 5,000+ posts]

I dont think you should have lowered it or deadened it. I dont think you will get to much.

 

[SethPhillips 5,000+ posts]

I dont think you should have lowered it or deadened it. I dont think you will get to much.

well i did so **** it... thinking about tradeing it for a dirt bike or four wheeler..

 

[01 S 10 10+ year member]

if it looks "good", somebody would probably like because it is lowered with a clean, straight body. I would say $1,500-$1,700 (asking price) with a good detail job. I'm sure there is somebody out there that wants a lowered truck. I really like mine //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[duece212 5,000+ posts]

fun good lookin trucks, great candidate for a smallblock, a cut through, or both //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[SethPhillips 5,000+ posts]

if it looks "good", somebody would probably like because it is lowered with a clean, straight body. I would say $1,500-$1,700 (asking price) with a good detail job. I'm sure there is somebody out there that wants a lowered truck. I really like mine //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

yea it's in awsome condition, just came from ohio so has light rust...

fun good lookin trucks, great candidate for a smallblock, a cut through, or both //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i miss driveing it. allot... just want to get rid of it cause it has been sitting in my shop for over 2 year's...

 

[duece212 5,000+ posts]

yea it's in awsome condition, just came from ohio so has light rust...


i miss driveing it. allot... just want to get rid of it cause it has been sitting in my shop for over 2 year's...

Your not that far away, if I could justify another project I'd pick it up but I've been spending way too much money lately. I miss mine sometimes //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[SethPhillips 5,000+ posts]

Your not that far away, if I could justify another project I'd pick it up but I've been spending way too much money lately. I miss mine sometimes //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

i wanted to do a sbc with 5-6spd manuel transmissin and full laying frame bag's... but i neeeeed money!!!

 

[SethPhillips 5,000+ posts]

Posted Pics At Top Of Thread!