Reply to thread

Message

<blockquote data-quote="bird_dog0347" data-source="post: 4469747" data-attributes="member: 588257">The PPI DCX800.5 is a bad *** amp. I have one in my boat, and just bought one for my truck and they sound great. I think Woofersetc still has a few around $500, and the one I bought for my truck is a factory refurb from ebay for 215 shipped. Here are the specs.4x50 Watts RMS at 4 ohms per channel @12.5VDC;4x100 Watts RMS at 2 ohms per channel @12.5VDC;Subwoofer Channel:1x200 Watts RMS at 4 ohm @12.5VDC;1x400 Watts RMS at 2 ohm @12.5VDC;Frequency Response 20Hz - 20kHz;Total Harmonic Distortion &amp;gt;0.02%;Signal to Noise ratioInput Sensitivity 150mV - 12 Volts RMS;Damping Factor &amp;gt;500;Built-in 12db/octive crossover.Requires a 100amp external fuse.28-1/8&quot; long by 10-1/2&quot; wide by 2-3/4&quot; thick.Built-in fan.</blockquote>

[QUOTE="bird_dog0347, post: 4469747, member: 588257"] The PPI DCX800.5 is a bad *** amp. I have one in my boat, and just bought one for my truck and they sound great. I think Woofersetc still has a few around $500, and the one I bought for my truck is a factory refurb from ebay for 215 shipped. Here are the specs. 4x50 Watts RMS at 4 ohms per channel @12.5VDC; 4x100 Watts RMS at 2 ohms per channel @12.5VDC; Subwoofer Channel: 1x200 Watts RMS at 4 ohm @12.5VDC; 1x400 Watts RMS at 2 ohm @12.5VDC; Frequency Response 20Hz - 20kHz; Total Harmonic Distortion >0.02%; Signal to Noise ratio Input Sensitivity 150mV - 12 Volts RMS; Damping Factor >500; Built-in 12db/octive crossover. Requires a 100amp external fuse. 28-1/8" long by 10-1/2" wide by 2-3/4" thick. Built-in fan. [/QUOTE]

Verification