First up is my Zapco AG360. Incredible SQ and very underrated. Amp is in good shape for its age. Looking for $200 plus shipping. OBO
zapco specs:
http://www.zapco.com/prod/pdf/ag360.pdf
Stereo, 4 ohms: 4x50 Watts
Stereo, 2 ohms: 4x90 Watts
Bridged, 4 ohms: 2x180 Watts
T.H.D. + Noise: 0.032% @ 4 ohms
S/N Ratio: 95dB
Slew Rate: 23V/uS
Damping Factor: 160@ 4 ohms
http://s259.photobucket.com/albums/hh302/valladon/Zapco%20AG360/
Second I have an Alpine MRV-F345 that I bought from a friend who never used it. I was going to use it for my truck but got a more powerful amp instead. I only hooked it up to make sure that it works. Looking to get $120 plus shipping OBO
Alpine specs:
• 4-channel car amplifier
• 75 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
• 300 watts RMS x 1 (channels 3/4 only) in bridged mode
• Amp Link allows single cable connection for signal and control with compatible Alpine receivers
• 2-, 3-, or 4-channel output
• CEA-2006 compliant
• Tri-way capable (Tri-Way crossover required)
• variable low- and high-pass digital filters, 30-400 Hz or 600-8000 Hz at 12 dB/octave
• bass boost (0-16 dB in 2 dB steps, centered at 45 Hz)
• MOSFET power supply
• STAR Topology (minimizes internal noise and prevents ground interference)
• preamp-level inputs and outputs
• oversized power and ground connections with gold-plated screw terminals
• top mounted controls with cover
• detachable front cover
• blue power LED
• requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
• dimensions: 13"W x 2-7/16"H x 9"D
I have lots of references on this site and others. My ebay id is nvest4profit and I have 100% positive feedback.
zapco specs:
http://www.zapco.com/prod/pdf/ag360.pdf
Stereo, 4 ohms: 4x50 Watts
Stereo, 2 ohms: 4x90 Watts
Bridged, 4 ohms: 2x180 Watts
T.H.D. + Noise: 0.032% @ 4 ohms
S/N Ratio: 95dB
Slew Rate: 23V/uS
Damping Factor: 160@ 4 ohms
http://s259.photobucket.com/albums/hh302/valladon/Zapco%20AG360/
Second I have an Alpine MRV-F345 that I bought from a friend who never used it. I was going to use it for my truck but got a more powerful amp instead. I only hooked it up to make sure that it works. Looking to get $120 plus shipping OBO
Alpine specs:
• 4-channel car amplifier
• 75 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
• 300 watts RMS x 1 (channels 3/4 only) in bridged mode
• Amp Link allows single cable connection for signal and control with compatible Alpine receivers
• 2-, 3-, or 4-channel output
• CEA-2006 compliant
• Tri-way capable (Tri-Way crossover required)
• variable low- and high-pass digital filters, 30-400 Hz or 600-8000 Hz at 12 dB/octave
• bass boost (0-16 dB in 2 dB steps, centered at 45 Hz)
• MOSFET power supply
• STAR Topology (minimizes internal noise and prevents ground interference)
• preamp-level inputs and outputs
• oversized power and ground connections with gold-plated screw terminals
• top mounted controls with cover
• detachable front cover
• blue power LED
• requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
• dimensions: 13"W x 2-7/16"H x 9"D
I have lots of references on this site and others. My ebay id is nvest4profit and I have 100% positive feedback.
