Reply to thread

Message: <blockquote data-quote="Trixter" data-source="post: 3536596" data-attributes="member: 542668">if you already made your box then you need to:-figure out the port length-figure out the port displacement-subtract the displacement from the box's original voulme-re-calculate the port length using this new volume--if using the precision ports, subtract 5" from this number and cut your center tube to this lengthif your using more than one port, divide the box by the numbers of ports and use this number to figure out the length. cut each port to this size. (this can be done for doing the calculation to find the first port length from the above steps.)</blockquote>

Top