Reply to thread

Message

<blockquote data-quote="CAT MAN" data-source="post: 7543479" data-attributes="member: 628192">your dsc1500 would do him very well.and on the testing part.when i do any of my test i go to the local audio shop. they have some nice handhelds. thats where i clamped my ap.i only saw about 800@2.2 ohms reactive . (keep in mind im dropping to 12v) and the scope was fine until i bumped it up to 850. then it was a clip . very fine linenow when i threw 2 YT&#039;s in there and held 14v the whole time i was seeing 944@2.2 reactive not too far from rated. and again i bump the gains up to 1k and see a clip.very fine line in these amps.&nbsp; but i have faith in them if you got juice. if not ill reccomend maxxsonics amps like the dsc series or brz . but im sure in others experiences where they didnt have an o-scope they were seeing 40000000 watts and clipping them to death. hell i cant hear a clip unless im in the port so its easy to get confused with reliable test and un reliable. the proof also lies in their efficiency (70%@1 ohm and best at 4 ohm is 80%) tells you it will take alot of power to put it out</blockquote>

[QUOTE="CAT MAN, post: 7543479, member: 628192"] your dsc1500 would do him very well. and on the testing part. when i do any of my test i go to the local audio shop. they have some nice handhelds. thats where i clamped my ap. i only saw about 800@2.2 ohms reactive . (keep in mind im dropping to 12v) and the scope was fine until i bumped it up to 850. then it was a clip . very fine line now when i threw 2 YT's in there and held 14v the whole time i was seeing 944@2.2 reactive not too far from rated. and again i bump the gains up to 1k and see a clip. very fine line in these amps. but i have faith in them if you got juice. if not ill reccomend maxxsonics amps like the dsc series or brz . but im sure in others experiences where they didnt have an o-scope they were seeing 40000000 watts and clipping them to death. hell i cant hear a clip unless im in the port so its easy to get confused with reliable test and un reliable. the proof also lies in their efficiency (70%@1 ohm and best at 4 ohm is 80%) tells you it will take alot of power to put it out [/QUOTE]

Verification