2 or 1.5 ohms?

[jordan572 10+ year member]

the amp would be connected to my reciever with a subwoofer out cable then i would use the 1/4 headphone on the reciever and by a cable that is a headphone to a rca

 

[adrian1185 10+ year member]

sorry but i just got to know.....How do you plan on running it at 2 ohms?

x2. i gotta know this one //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[jordan572 10+ year member]

i would use my reciever with a sub out and connect to the amp then use the 1/4 headphone jack annd buy a cable that is a headphone to rca to connect audio to the amp

 

[jordan572 10+ year member]

how would i wire it at 3 ohms just wire it into won side of the sub?

 

[grimreper912003 5,000+ posts]

With a little google, I round out they are infact D1.5. My mistake. Anyways, what is your amp stable to? I think wiring to 3ohm like CRX said will be the best unless you wanna cheat death with the amp. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[jordan572 10+ year member]

the makers of the amp say it can handle 2 ohms i will post a link.

 

[grimreper912003 5,000+ posts]

how would i wire it at 3 ohms just wire it into won side of the sub?

same as this sub http://akamaipix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/1DVC_2-ohm_mono.jpg

 

[jordan572 10+ year member]

http://www.behringer.com/EN/Products/EP2500.aspx

 

[terra 5,000+ posts]

Yes and how will you be getting a 2 ohm load with that sub?

 

[grimreper912003 5,000+ posts]

Yes and how will you be getting a 2 ohm load with that sub?

Reconing it with omega soft parts. duh //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[terra 5,000+ posts]

Hahaha

 

[adrian1185 10+ year member]

i think you may be a little confussed my friend. im not trynna be an *** or anything but the numbers just wont allow you to wire it at 2 ohms. the closest you will get is 3 ohms. yes, the amp is stable @ 2 ohms but you cant just make the sub do a 2 ohm load.

 

[jordan572 10+ year member]

im a dumbass idk what i am talking abot but how many watts would this amp put out at 3 ohms

 

[jordan572 10+ year member]

yeah i get that it has to be 1.5 or 3 ohms now but how manyw atts would that amp put out at 3 oh,s

 

[adrian1185 10+ year member]

not sure but if i had to guess i would say between 1700-2000. the site is limited power info