Sold 2 neo storm motors/tops/subs w/extra parts

HawaiianBassHed
10+ year member

CarAudio.com Elite
Rating: 0%
0 0 0
apparently I was more tired than I thought when I originally posted this thread.

I'm selling 2 working neo storm subs, one with a 10" d2 top and one with a storm 12" d4 top. I will include the following accessories with them or sell them seperately IF someone buys the subs and elects to not want any of the other parts.

both subs will come with an adapter ring to run a standard 6 bolt pattern basket. and u can have a storm 15" q1 top for the cost of shipping ($45) the 15" tops have cracked cones, but should be easily repairable. I actually had three originally and just glassed the cone on the other, but it added unwanted weight so tho it worked and still got loud, it wasn't nearly as efficient. but u can cutout the cone and drop a new one in if u want and it would work fine so long u do a good job swaping cones //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif one top currently has the ring attached to it (the d2 10" custom recone made by FI for me a while back) and u cannot remove it until u take apart the recone that's on it. I can include a 12 spoke 10" basket with the storm motor as well as a 12" venezuela basket or even with the 10" should someone want for an additional $30 (shipped) shipping since I'm in HI isn't gonna be pretty but I'd sell either sub (without the 15" parts) for $320 shipped. the storm 12" had an issue when I got it and the spider plateau came undone resulting in some tearing in the top spider (can't see the bottom one) but after I gorilla glued the platfom back down I never had problems and ran it daily with 1000rms for a few months before swapping my tipro back in, which also got removed last week out of curiousity I picked up an 8w7/HO box from my buddy and have that in there...

sorry for the rambling post/edit still tired went to bed this morning (didn't sleep last night) and got probably 4hrs in as the morning prior so for 2 days I'm running on low sleep lol and I noticed I worded it retardedly and this is the best fix I could do atm. home it makes more sense, it makes sense to me in my head as I know what I'm trying to do, but since no one here is a mind reader I don't think that I was as clear as a concrete wall //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

l_6d943453b3ef4df0b79c5771b8e2c3d0.jpg


l_cbdc5485785c4f7f86b870f92c5b641f.jpg


l_d1907f83855f4b36881de88ba153b24d.jpg


l_982db74788e2452ca7b3026b2efac0fb.jpg


l_982db74788e2452ca7b3026b2efac0fb.jpg


 
not selling the 12" top seperate, but I think the axis has bolt holes on the sides of the motor not the 4 on top like all motors and tops //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
thats the top to go with one of the motors it a 10" d2, can run easy 1500rms, I ran it and it's twin on a pair of crossfire xp1400ds strapped@ 2ohms daily. got plenty loud. from what I've read they clamp more power than sundown 1500ds and I read another person saying they tested 1800ish each out of theirs... wouldn't doubt it as they are some not bad amps //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif so $200+ ship for it if u want the 10" d2 neo sub //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

http://s168.photobucket.com/albums/u175/hawaiianbasshead/?action=view&current=higherresvid.flv

that was 2.25 cubes each tuned to 40 or 42hz iirc...

 
I'm very interested in the motors but I can't help but ask, you do know that any adapter ring applied to the motor that is ferrous will change the flux pattern considerably, don't you?

 
I'm very interested in the motors but I can't help but ask, you do know that any adapter ring applied to the motor that is ferrous will change the flux pattern considerably, don't you?
sorry, original post edited, not looking to sell the motors seperately unless u wanna buy them for $200ea... just really looking to sell the subs, if not I'll try to swap cones on the 15"s and run them //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

as for the metal causing problems. seem fine to me. my termlab has never been concerned with what the motors thought about it so I never really cared to be honest LOL

 
bizzump..

I need a messiah darklite ps3 blueray remote

a six axis wireless controller

pac ICAV2 ipod cable

ummm.. widescreen flipdown

double din w/ipod video capabilities and hopefully can play videos off usb flash drives...

not sure what else.. amps I guess would be willing to trade all of it just to send it to one person. BUT IF I were to sell both motors and working tops for $400+ ship I don't mind splitting it up //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

HawaiianBassHed

10+ year member
CarAudio.com Elite
Thread starter
HawaiianBassHed
Joined
Location
Pahoa,HI
Start date
Participants
Who Replied
Replies
7
Views
755
Last reply date
Last reply from
HawaiianBassHed
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top