2 amps from 1 rca output

[geowick07 10+ year member]

My first and foremost recommendation is a new HU. But, barring that, most amps have a line-in and line-out. You could try daisy-chaining your amps and see if that works. Good luck!

Click to read more...

 

[UMGixxer 10+ year member]

i dont think you will lose anything from splitting rcas i have done this before and i noticed no change, but as mentioned above if your hu only came with 1 rca i think you need another hu because that thing has got to be old i dont think anyone makes hu's anymore with 1 rca

 

[UMGixxer 10+ year member]

it says it has 2 sets of rcas, do you own the hu now

 

[UMGixxer 10+ year member]

next time you buy a hu make sure it has at least 2 sets and other connections as well

 

[helotaxi 5,000+ posts]

There's nothing wrong with using Y-cords to connect the HU to the amps if neither of the amps have a line out.

 

[Louisiana_CRX 5,000+ posts]

You can use Y adapters at either end...I'd recomend behind the deck and run another set of RCA's from the deck to the amps...That way if you ever update head units your RCA's will already be run...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[helotaxi 5,000+ posts]

You can use Y adapters at either end...I'd recomend behind the deck and run another set of RCA's from the deck to the amps...That way if you ever update head units your RCA's will already be run...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Because he probably only has nominal 2v preouts I would recommend the exact opposite for now because of line length.