Reply to thread

Message

<blockquote data-quote="hrtbrk1" data-source="post: 4574744" data-attributes="member: 590717">here man follow these steps...the diagram is pretty simple its just i used 2 many colors...and i didnt draw the subs...so lets start of with the subs...sorry it dont look 2 good...buttah yeah...step one...drill holes on the box...just small enough for the wires to go thru...(red and green circle thing on the pic)2.bridge one + and one - on each sub...use + on one coil and the - on the other coil.(blue wire)3. wire all the positives together and make the last one come out of the tcup(brown wire)4. wire all the negatives together and make the last one come out of the same tcup(green wire)now to the amps...set one amp to master and the other one to slave...make one phase shift 0 and the other one 180(im not too sure on this one.) now...using a long wire...connect both negatives of each amp....(skinny brown wire)now using the positive of the master amp...connect the + sub wire to that(skinny brown wire)and using the positive of the slave amp...connect the - sub wire to that(other skinny brown wire)...thats one way of doing that...heres the pic...i recommend you seal the tcups tight...and u might actually just seal them really tight and drill one more hole so the sub and amp can directly be wired...<img src="http://i16.photobucket.com/albums/b16/HrtBrk1/diagram.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />^^^diagram</blockquote>

[QUOTE="hrtbrk1, post: 4574744, member: 590717"] here man follow these steps...the diagram is pretty simple its just i used 2 many colors...and i didnt draw the subs...so lets start of with the subs...sorry it dont look 2 good...buttah yeah...step one...drill holes on the box...just small enough for the wires to go thru...(red and green circle thing on the pic) 2.bridge one + and one - on each sub...use + on one coil and the - on the other coil.(blue wire) 3. wire all the positives together and make the last one come out of the tcup(brown wire) 4. wire all the negatives together and make the last one come out of the same tcup(green wire) now to the amps...set one amp to master and the other one to slave...make one phase shift 0 and the other one 180(im not too sure on this one.) now...using a long wire...connect both negatives of each amp....(skinny brown wire) now using the positive of the master amp...connect the + sub wire to that(skinny brown wire) and using the positive of the slave amp...connect the - sub wire to that(other skinny brown wire)...thats one way of doing that... heres the pic...i recommend you seal the tcups tight...and u might actually just seal them really tight and drill one more hole so the sub and amp can directly be wired... [IMG]http://i16.photobucket.com/albums/b16/HrtBrk1/diagram.jpg[/IMG] ^^^diagram [/QUOTE]

Verification