Reply to thread

Message

<blockquote data-quote="Papermaker85" data-source="post: 8469673" data-attributes="member: 572595">the length of the L i told ya 12, but the thickness of the port wall is 1.5 and i didn&#039;t account for that thats why i said 10&quot;s.. yea you could remove it easily.. place a &quot;track&quot; around the port made of wood that you can screw the port to instead of directly into the box. once you pull the L portion out you could put some small peacies of wood to change your air space.. without the L portion would be 14 cubes tuned to 42. abit too highwith the l portion being 5&quot; long its 13.35 tune to 38 and with it 10&quot; long its gonna be right around 35hz.. thats with the port double baffel and the braces in the port and the 45 degree cuts for the corner.. the corner peace in the port like i drew up is very important its gonna help greatly..its gonna be strong enough to drop some HDC3s with 2k per driver in there if you want later on..</blockquote>

[QUOTE="Papermaker85, post: 8469673, member: 572595"] the length of the L i told ya 12, but the thickness of the port wall is 1.5 and i didn't account for that thats why i said 10"s.. yea you could remove it easily.. place a "track" around the port made of wood that you can screw the port to instead of directly into the box. once you pull the L portion out you could put some small peacies of wood to change your air space.. without the L portion would be 14 cubes tuned to 42. abit too high with the l portion being 5" long its 13.35 tune to 38 and with it 10" long its gonna be right around 35hz.. thats with the port double baffel and the braces in the port and the 45 degree cuts for the corner.. the corner peace in the port like i drew up is very important its gonna help greatly.. its gonna be strong enough to drop some HDC3s with 2k per driver in there if you want later on.. [/QUOTE]

Verification