(2) 15" Eclipse Ti SW9152 D4: (1) NIB, (1) LNIB

Status
Not open for further replies.

( . )( . )
10+ year member

A.K.A. Spanyerd
200
0
Yuma, AZ
Item(s) for Sale:

(2) 15" Eclipse Ti SW9152 D4: (1) NIB, (1) LNIB

Item(s) Description/Condition:

(1) N.I.B.

(1) L.N.I.B. - Nearly brand new. It has only about 4 hours of music on it (it wasn't over/under powered, I just wanted to see what it sounded like). The only marks are under the rubber mounting ring where the screws mount the sub.

Both are in the OEM boxes and packaging, along with the manual.

1500 wrms (each)

Up to 3" linear peak-to-peak xmax

Solid Titanium cone

2" Wide Polyether Surround

Dual Mirror Spiders

3" 4-Layer, Dual 4 ohm, Aluminum Voice Coil

Triple-stacked magnet

Removable motor/basket assembly

Specs shamelessly stolen from Audio_Phill's thread....

Re = 6.3646 ohms

Fs = 34.9878 Hz

Zmax = 92.7325 ohms

Qes = 0.6472

Qms = 8.7827

Qts = 0.6028

Le = 6.0781 mH (at 1 kHz)

Diam = 317.5000 mm ( 12.5000 in )

Sd = .0792m^2(122.7185 in^2)

Vas = 53.5213 L ( 1.8901 ft^3)

BL = 27.2810 N/A

Mms = 344.2702 g

Cms = 60.1046 uM/N

Kms = 16637.6641 N/M

Rms = 8.6172 R mechanical

Efficiency = 0.3328 %

Sensitivity= 87.2398 dB @1W/1m

Optimum Enclosures:

Either....

- 4.9net sealed for an F3 of 41.33

or.....

- 7net @ 23Hz for an F3 f 20.2Hz with 50sq" of port area. Break-in on 4net @ 27Hz on 1500rms.

My experience:

Excellent results can also achieved in smaller ported enclosures. Example: 5net @ 28Hz (F3 of 23.6Hz) with 60 sq" of port

Price:

$250 each, or both for $475. Those prices are for cash at pick up at 85367.

$290 shipped each, or both shipped for $550. Payment through PayPal only.

Prices are firm.

THE ONLY TRADE I WOULD CONSIDER IS FOR A SET OF ECLIPSE SC8365 COMPONENTS IN VGC + $$ FROM YOUR END.

Shipping and Miscellaneous Item Information:

I can deliver to El Centro CA for free, and anywhere within 100 miles of 85367 for $30 (gas money).

They'll ship FedEx, well-protected, double-boxed, and insured.

Refs:

- DIYMA.com

- 100% Ebay profile from 206 people over 8+ years: eBay Feedback Profile for yam_bag

Item Pictures:

CIMG1076.jpg


CIMG1083.jpg


CIMG1078.jpg


CIMG1080.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

SEE MY OTHER SUBWOOFER F.S. THREADS HERE....

http://www.caraudio.com/forums/subwoofer-classifieds/510333-sale-15-fi-btl-excellent-condition.html

http://www.caraudio.com/forums/subwoofer-classifieds/510410-dc-15-xl.html

http://www.caraudio.com/forums/subwoofer-classifieds/510345-cerwin-vega-stroker-15-d4.html

More coming soon...

 
Last edited by a moderator:
im in el centro any trades.......
As far as car audio goes, I'm not really in the market for anything other than the SC8365's at the moment, but you're what I would consider "local" so PM any ideas.

Other than car audio: My '98 Ram 2500 4x4 needs a trans. I need a ton of work done on the boat (outdrive rebuild, bottom paint, upholstery, hull paint). A 700R4 trans for the Firebird. 500+ wrms home audio sub / plate amp. Can't think of anything else right now.

 
//content.invisioncic.com/y282845/emoticons/omg.gif.05aa02c3095d6ce9338996654eca0863.gif//content.invisioncic.com/y282845/emoticons/awesome.gif.4430a219d9aaaa6cadc75e9290979dfb.gif//content.invisioncic.com/y282845/emoticons/inlove.gif.6846f78f06b405429ef3a00129788a2a.gif//content.invisioncic.com/y282845/emoticons/applause.gif.bb805d8088f72dbc2fe808c29e85fb4c.gif

and to think i was happy i just got a 9122

 
Would you be interested in a pair of 18" mats juggs and a set of 5.25" t152s Rockford components
I was interested in those huge juggs a couple weeks ago when I offered to trade my Cerwin Vega S2000.1 + $$ for them. I've splattered my monitor 100 times since then thinkin about em, but I really need to move a sh*t-ton of subs ASAP. Thnx anyway.

 
//content.invisioncic.com/y282845/emoticons/omg.gif.05aa02c3095d6ce9338996654eca0863.gif//content.invisioncic.com/y282845/emoticons/awesome.gif.4430a219d9aaaa6cadc75e9290979dfb.gif//content.invisioncic.com/y282845/emoticons/inlove.gif.6846f78f06b405429ef3a00129788a2a.gif//content.invisioncic.com/y282845/emoticons/applause.gif.bb805d8088f72dbc2fe808c29e85fb4c.gif
and to think i was happy i just got a 9122
I'd be happy too. I loved my 9122 for the very short time I had it. Hopefully you got a a good portion of it's cost knocked off in trade for one of your two SKAR's. Sux you had/have to get rid of em. Yo, check it....

CIMG1056.jpg


4 SKAR's on 2.1kwrms in 8net@28Hz (F3 of 24.5Hz). And sounding feckin' ****** doin it!!!

Who gives a rats-*** if there's no room left for anything else back there, right?.....Right?.....Hello?

 
ok spanyerd do you buiild enclosures ?
This is what was in there before the current 4-SKAR set up...

CIMG1050.jpg


2 SKARS in 4net@26Hz (F3 of 23.5Hz). Still have that set up sitting in the garage doing nothing.

That's my little daily driver Yaris that I use to go back n forth in from the east Yuma Foothills to Mexicali every weekday. Gotta be entertained when you're in the car for 3 hours a day.

 
mexicali ayy cabron lol

i need an enclosure built for six cadence 8's //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
I'd be happy too. I loved my 9122 for the very short time I had it. Hopefully you got a a good portion of it's cost knocked off in trade for one of your two SKAR's. Sux you had/have to get rid of em. Yo, check it....
CIMG1056.jpg


4 SKAR's on 2.1kwrms in 8net@28Hz (F3 of 24.5Hz). And sounding feckin' ****** doin it!!!

Who gives a rats-*** if there's no room left for anything else back there, right?.....Right?.....Hello?
o **** thats nic man...i like theskars is just i need pace and nonly have room for a single 12 now....but i bought it off a guy local for 150
 
mexicali ayy cabron lol

i need an enclosure built for six cadence 8's //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Ohhh ****....WTF did I get myself into now?

Kiddin Bra. If you need help with a serious build, LMK.

 
Ohhh ****....WTF did I get myself into now?
Kiddin Bra. If you need help with a serious build, LMK.
i need to get to bed but i added you on the caraudio.com messenger thing i also have a tc built 15 u might be interested in

for now im off to bed goodnight

and thomas quit drunk texting u assbag

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

Similar threads

Very Nice!! I wished Id seen this two months ago. I ended up picking up a BNIB Sony XEC-1000. GLWS!! Ill chew on it a bit,and may pick it up??
1
129
  • Locked
COMPLETED WTB Eclipse SC8365
I checked at Diyma and I signed up for an account but I cant post in the classifieds. Thanks for the tip, I'll keep a check there.
7
1K
I have a couple 3000s and 5000s and cant remember the other two right off hand, but these will not work with your unit that I can think of by...
4
792
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K

About this thread

( . )( . )

10+ year member
A.K.A. Spanyerd
Thread starter
( . )( . )
Joined
Location
Yuma, AZ
Start date
Participants
Who Replied
Replies
26
Views
3,591
Last reply date
Last reply from
( . )( . )
IMG_0925.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0
IMG_0924.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top