2-12" ssa dcon or 1-15" ssa gcon

[stlquickshift]

So I just saw the Gcon came out and I was already to purchase 2 dcons. These are going in a sealed box around 1.0 cubes per chamber on the 12's sealed. Or should I change to a single 15 inch Gcon around 2.0 cubic feat or less sealed anyways these are going on a pdx 600 mono block thats alpine digital btw. Thx guys. Also since this is a 600w mono block amp will it push the 15 enough was'nt sure.

Click to read more...

 

[denim 5,000+ posts]

Do you have space restrictions?

 

[Falcons 5,000+ posts]

Do you have space restrictions?

hey aaron i bet you guys were planning to hear this a lot lol

 

[denim 5,000+ posts]

hey aaron i bet you guys were planning to hear this a lot lol

Do you mean 2 Dcon's or 1 Gcon? I guess so. The Dcon likes smaller enclosures, where as the Gcon will like larger enclosures. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[stlquickshift]

I have slight space requirements my depth will be around 8-9 inches my question was more on the side of my amp for the application alpine pdx 600 I am guessing the 2 dcons will hit harder again this is a sealed enlosure around 2-2.5 cubes with the gcon and around 1sh per chamber sealed for the dcons I have looked at the specs on the dcons and know I have a mounting depth peramiter of 6.5 inches and they like to be around 1 cube per chamber. But if the G con can take the 600 watts or will stress my amp to much.

 

[naughtyca 10+ year member]

well from last i checked Dcons 12" d4 new are not available to buy, unless your willing to wait, I was looking at the dcon too

 

[denim 5,000+ posts]

I have slight space requirements my depth will be around 8-9 inches my question was more on the side of my amp for the application alpine pdx 600 I am guessing the 2 dcons will hit harder again this is a sealed enlosure around 2-2.5 cubes with the gcon and around 1sh per chamber sealed for the dcons I have looked at the specs on the dcons and know I have a mounting depth peramiter of 6.5 inches and they like to be around 1 cube per chamber. But if the G con can take the 600 watts or will stress my amp to much.

The amp does not care what the rms ratting of a speaker is. The amp will only be stressed if you wire it below it's stable resistance.

 

---------- Post added at 02:44 PM ---------- Previous post was at 02:43 PM ----------

 

Forgot to mention, Gcon box specs are up.