2 10" G5's pr 1 12" G5

[sporty_drew 10+ year member]

I'm just wondering what you guys would get if you had a Kenwood 9102 (850 @ 2ohms) and a 1.3 ft^3 sealed box. Please keep to these two subs for now, i knows theres plenty more out there but i want to try the G5's. Thanks, Drew

Size

10 -inch

​

12 -inch

​

Impedance

4 ohms

​

4 ohms

​

Cone Material

Copolymer

​

Copolymer

​

Surround Material

Foam

​

Foam

​

Sealed Box Volume (cubic feet)

0.5

​

1

​

Ported Box Volume (cubic feet)

1.3

​

2

​

Port diameter (inches)

3

​

4

​

Port length (inches)

11

​

14

​

Free-Air

No

​

No

​

Dual Voice Coil

No

​

Yes

​

Sensitivity

88.9dB

​

94.3dB

​

Frequency Response

24 - 0.35k Hz

​

20 - 0.35k Hz

​

RMS Power Range (Watts)

100-450

​

100-450

​

Peak Power Handling (Watts)

---

​

---

​

Top Mount Depth (inches)

6 11/16

​

7 3/8

​

Bottom Mount Depth (inches)

7 5/16

​

8 1/8

​

Cutout Diameter or Length (inches)

9 3/16

​

11

​

Vas (liters)

29.54

​

75.28

​

Fs (Hz)

34.51

​

28.88

​

Qts

0.55

​

0.47

​

Xmax (millimeters)

15.3

​

15

​

Click to read more...

 

[Kold_Killa 10+ year member]

Umm, considering you could use all 850watts (425 a piece) to the two 10s this is a no brainer. With the 12 you would only get 425 watts. I would have probably said the two 10s even if you could supply equal power to both situations. 2 10s, 2 ohm load ftw

 

[sporty_drew 10+ year member]

I don't understand why i would only get 425 watts with a 12

 

[johnson 10+ year member]

Because the 12" has a single 4 ohm voice coil (from what you posted).

 

[sporty_drew 10+ year member]

the lines aren't lined up for the 12 and 10, the 12 says it's a dual voice coil, the 10 isn't