$260 shipped each, discount for multiples. 165ah! That's like two HC1800's or D3400's, or 1.5 HC2400's or D3100's...try seeing what that would cost you. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
These are never been used Sprinter S12V500f batts. They're exactly one year old, and were supposed to be used as a UPS for an energy company that went under. They were installed, but never used, and have been given maintenance charges since then. Moving/storage has given them a few small scuffs, but they really do look great...noticeably better condition than the C&D batts I was selling for around the same price, and more power with these too!
Specs:
-13.55" x 6.76" x 10.9"
-106lbs
-505 watts/cell, which works out to be right around 165ah
-Nearly 5000 short circuit amps
-Sealed, non-spillable, AGM technology
-6m threaded inserts
-Patented “Diamond Side-Wall” design to maintain structural integrity in higher operating temperatures
-Heat sealed case-to-cover bond to ensure a leak proof seal
-High-Compression Absorbent Glass Mat (AGM) technology for greater than 99% recombination efficiency
-High-tin, calcium, silver, lead positive plate design for maximum service float life: 8 year design life @ 25°C (77°F); 10 year @ 20°C (68°F)
-Heavy duty copper alloy terminals for ease of assembly and reduced maintenance
-Reliable one-way, self-resealing safety vents
-Multicell design for faster installation and reduced maintenance
-Horizontal or vertical operation
These are never been used Sprinter S12V500f batts. They're exactly one year old, and were supposed to be used as a UPS for an energy company that went under. They were installed, but never used, and have been given maintenance charges since then. Moving/storage has given them a few small scuffs, but they really do look great...noticeably better condition than the C&D batts I was selling for around the same price, and more power with these too!
Specs:
-13.55" x 6.76" x 10.9"
-106lbs
-505 watts/cell, which works out to be right around 165ah
-Nearly 5000 short circuit amps
-Sealed, non-spillable, AGM technology
-6m threaded inserts
-Patented “Diamond Side-Wall” design to maintain structural integrity in higher operating temperatures
-Heat sealed case-to-cover bond to ensure a leak proof seal
-High-Compression Absorbent Glass Mat (AGM) technology for greater than 99% recombination efficiency
-High-tin, calcium, silver, lead positive plate design for maximum service float life: 8 year design life @ 25°C (77°F); 10 year @ 20°C (68°F)
-Heavy duty copper alloy terminals for ease of assembly and reduced maintenance
-Reliable one-way, self-resealing safety vents
-Multicell design for faster installation and reduced maintenance
-Horizontal or vertical operation
