Reply to thread

Message: <blockquote data-quote="audiofanaticz" data-source="post: 1078764" data-attributes="member: 557558"><p>The subs are both wired in parallel. Thats why I asked if the two positives are connected internally to each other, same with the negitives. Which they are from what the responses where. So its kinda nice that if you are using two 4 ohm dvc subs you can run say 8 guage from your amp to your subs when your trying to get every .1 db. Then your not trying to cram 2 big wires in one small hole on the amp. Otherwise i was thinking that the amp was only running at 2 ohms a sub in like stereo, but the amp is pre bridged, but say a normal class a/b amp or any two channel the amp would be at 2 ohm stereo from the drawing above looking at it.</p></blockquote><p></p>

Top