Reply to thread

Message: <blockquote data-quote="audiofanaticz" data-source="post: 1075924" data-attributes="member: 557558">ok, yes, the amp is capable of straping together with another but its not the case. just used it as a visual.So then the way the subs where hooked to it where correct and the amp was running at a 1 ohm load with both subs connected to it. because both subs are 4 ohm dvc. So that would mean that the positives are connected together internally along with the negitives being connected together internally. I just wasnt sure if they where like the US Amps or not. I just figured that since it was a competition amp like the us amps are that you have the extra outputs for when your running 10 guage speaker wire, so you dont got to try and cram 2 big wires in one tiny hole.I was just still iffy on that part alone and just wanted to be sure, so I can tell my friend that was not one of the reasons the amp became toast, so that leaves the only error with mr allpro and full gain...Sorry for me sounding like a noob, but none of us really messed around with forgien crap like this.. Ill be sticking with my 4000x us amps over these spls for sure.PS: funny thing is mr all pro has a knick name called knobie because he loves his gains up all the way, and when my buddy got the audiobahn a2300's he wouldnt leave the lil bass knob alone, and that had to be cranked along with the amp gains.I still think its funny how the audio bling amp can run for over a hour at the same load with almost the same setup and not cut out, but now for the spl dynamics it cant even hang for 25 seconds, and the spl dynamic ext-300d was three times as much...Oh well. Thanks for all the input and help, I'll be printing this out for proof of how the amp fried most likely so mr all pro can see that the wonderful gain should not always be cranked.</blockquote>

Verification

Top

What's new

Forum list