15" LMS ULTRA, 15" Axis/TC-3000, 15" TC-9, 12" LMS/eclipse 8200, all FS

[martiandancer31 10+ year member]

Item(s) for Sale:

15" AudioPulse/TC LMS ULTRA

15" TC Sounds TC-3000/ Audiopulse Axis

15" Eclipse TC-9 (built by TC sounds)

12" Eclipse 8200 with LMS technology (also built by TC sounds)

Voice Coil Configs:

15" LMS - dual 2

15" tc-3000 - dual 2

15" tc-9 - single 4

12" LMS - single 4

Item(s) Description/Condition:

All subwoofers are in excellent condition both cosmetically and mechanically. All surrounds are as close to perfect as they can be.

-The LMS ultra's cone is near mint, couple very, very small dings. The MAGNET was slightly damaged at one point, and repaired by audiopulse/tc. I have been on the phone with audiopulse/tc seeing if I should simply purchase a new 4hp motor and they assured me that unless a significant portion of the magnet was missing, it was fine. See pics.

-the TC-3000's cone has a few more dings than the LMS but they're still very, very minor and hard to photograph. Everything else is excellent. There may be some silicon on the mounting surface (it's not an "adhesive", but it's slightly difficult to remove), but it does NOT affect operation or mounting in any way.

-the eclipse tc-9 is mint. Slight, slight ding in the cone. Same applies w/the silicon as above.

-the 12" LMS is LNIB. It's in ridiculously good condition and I think you'd be hard pressed to find a fault with it.

Price:

15" LMS Ultra - $600 + ship

15" tc-3000 - $325 + ship

15" eclipse tc-9 - $150 + ship

12" LMS - $200 + ship

Shipping and Miscellaneous Item Information:

shipping will be whatever I can find that is the cheapest.

NOTE: FOR THE 15" LMS AND 15" TC-3000, i WILL be shipping the top assembly/motor separately. This is how TC Sounds does it, so this is how I will do it. They will DEFINITELY get to you safely this way.

If you need refs, talk to cianzo on here, i've dealt with him several times in the past. Also, gucci_soldier, or any of the other people i've dealt with on here, you won't here anything bad about me.

also, i'll say this right now: NO TRADES!! NO TRADES!! ABSOLUTELY NO FREAKING TRADES!!! I NEED CASH!!

Item Pictures:

More pictures are certainly available upon request, but these are a few to get you started:

15" LMS:

15" TC-3000:

(ONLY LETS ME PUT 10 PICS IN SO LINKS FOR THE REST

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1135.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1138.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1141.jpg

15" TC-9:

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1305.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_0707.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_0705.jpg

unfortunately it's dark and I can't get good pics of this thing, but if you want to see more, just ask!!!

12" LMS:

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1111.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1110.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1112.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1113.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1114.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1115.jpg

http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1107.jpg

let the fun begin....

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[martiandancer31 10+ year member]

bump for lots of views....lol

 

[martiandancer31 10+ year member]

bump

 

[martiandancer31 10+ year member]

bump for over 1500 views....lol. Anybody on the tc-3k?? Still for sale!! Comes with a free set of measured T/S params!

 

[Ryan shaw 10+ year member]

If the t/s were the same as my axis I'd take it

 

[martiandancer31 10+ year member]

If the t/s were the same as my axis I'd take it

what are the t/s on your axis? might be closer than you think. I can measure and find out.

 

[Bettr n' Revrse 5,000+ posts]

Whats still left?

 

[martiandancer31 10+ year member]

Whats still left?

LMS 5400 and tc3000

 

[Bettr n' Revrse 5,000+ posts]

The blue one with the Fuggered up motor?

 

[Ryan shaw 10+ year member]

all the tc 3k's i've measured have had higher qts and lower bl

my axis has

qts .357

BL 26.2

VAS 4.442 cu ft

fs 21.9

spl 87.6

re 4.7

 

[martiandancer31 10+ year member]

The blue one with the Fuggered up motor?

sort of....lol. The motor works 100% //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

all the tc 3k's i've measured have had higher qts and lower bl
my axis has

qts .357

BL 26.2

VAS 4.442 cu ft

fs 21.9

spl 87.6

re 4.7

i'll measure with the coils in parallel for 1 ohm....might be close. I think qts on this one is a lil above 4 IIRC but i will measure and find out.

 

[Bettr n' Revrse 5,000+ posts]

sort of....lol. The motor works 100% //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif


i'll measure with the coils in parallel for 1 ohm....might be close. I think qts on this one is a lil above 4 IIRC but i will measure and find out.

What was the price on it again? and what will it hold daily?

 

[martiandancer31 10+ year member]

What was the price on it again? and what will it hold daily?

price is....well, PM me and we'll talk. I was hoping for $600 ish plus shipping (which is not cheap on this) but i'm entertaining good offers.

As far as power, i'd say it can hold at least 3k daily if you know what you're doing, probably more. It's a 4" coil and 10" spider.

 

[martiandancer31 10+ year member]

to the top

 

[Ryan shaw 10+ year member]

Pm's full sir!

But Would you do 300 shipped for that tc-3000? Or 800 shipped for the 5400 and the 3000? Pm me back!

 

[Ryan shaw 10+ year member]

Pm's full sir!

But Would you do 300 shipped for that tc-3000? Or 800 shipped for the 5400 and the 3000? Pm me back!