12 with good lows?

[wickedwitt 10+ year member]

[quote name='dejesu']how do you think one sundown E 15 would sound on 1100 @ 1ohm? as opposed to two SA12's on that power?
@quackhead ; @wickedwitt ; @RAM_Designs ;

Sundown 400w E-series 15" metering and playing - YouTube[/QUOTE]
Clear yo PMs homie. @dejesu

 

[BoomBoxStereo 10+ year member]

[quote name='wickedwitt']Clear yo PMs homie. @dejesu[/QUOTE]

cleared!

 

[wickedwitt 10+ year member]

cleared!

sent!

 

[psychoacoustics 10+ year member]

getting the lowz isnt based on woofers as much as the box

 

[Kangaroux 5,000+ posts]

ghet dc

26hz isn't low lows //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[quackhead 10+ year member]

[quote name='dejesu']how do you think one sundown E 15 would sound on 1100 @ 1ohm? as opposed to two SA12's on that power?
@quackhead ; @wickedwitt ; @RAM_Designs ;

Sundown 400w E-series 15" metering and playing - YouTube[/QUOTE]

I saw that vid, but I dd not catch what amp the guy was using..and I know in the other one they were burping 1k+ to each 12..but that is burping. IMO, about 6 - 750 ea. clean on music in a good box. Have you thought about having a box built that will work with the P3's and other subs as well? for example, say about 3.75 - 4.0 @ 33-35hz with the right amount of port area? IIRC, don't you have the factory pre-fab for the P3's?

 

[BoomBoxStereo 10+ year member]

I saw that vid, but I dd not catch what amp the guy was using..and I know in the other one they were burping 1k+ to each 12..but that is burping. IMO, about 6 - 750 ea. clean on music in a good box. Have you thought about having a box built that will work with the P3's and other subs as well? for example, say about 3.75 - 4.0 @ 33-35hz with the right amount of port area? IIRC, don't you have the factory pre-fab for the P3's?

bought the box off a buddy who said it was "custom" for them... but i don't think there's anything custom about it. i never got measurements of the box (as i haven't cared to find out because i just need a new box anyway). it's just a typical center port up/ firing up

 

[cdc351jeferson 10+ year member]

[quote name='dejesu']bought the box off a buddy who said it was "custom" for them... but i don't think there's anything custom about it. i never got measurements of the box (as i haven't cared to find out because i just need a new box anyway). it's just a typical center port up/ firing up[/QUOTE]

ask @double 07 ; for a box maybe he can make a sweet box well priced

 

[double 07 10+ year member]

[quote name='cdc351jeferson']ask @double 07 ; for a box maybe he can make a sweet box well priced[/QUOTE]

Thanks guy......he sent me a PM.....it has been replied to...

 

[RAM_Designs 5,000+ posts]

getting the lowz isnt based on woofers as much as the box

Again.

 

[BoomBoxStereo 10+ year member]

well let's just put it this way now... at this point if i got a new enclosure, what would be some good subs to replace the P3's when i sell them? again, looking for a 4 ohm sub around a 600-700 watt RMS rating since my amp is rated for 1100 @ 1 ohm

 

[mlstrass 5,000+ posts]

Couple of Obisidians would do the job nicely in the right enclosure...

 

[TitoThePirate 10+ year member]

05 re xxx