Reply to thread

Message

<blockquote data-quote="Crsracing" data-source="post: 8700979" data-attributes="member: 678990">That&#039;s what everyone (including fi) said go 2 10&#039;s for output so its between the gcon and ssd. I got the specs from them for a ssd with the high qts soft suspension and high xmax options they didnt say how the new qts affected the qes/qms so I just plugged the new specs into there chart.SsdCoils DUAL 1 | DUAL 2FS Fs: 31 Hz | 31HzRE 0.75| 1.5QMS 5.13 | 5.13QES 0.36 | 0.36QTS 0.48 | 0.48MMS 279g | 285gCMS 0. | 0.SD 310cm^2 | 310cm^2VAS 15.1 l | 15.1 lSPL 83.1dB | 83.1dBBL 17.11 N/A | 24.3 N/AXMAX 30+mm (One Way)RMS 1500WGcon<ul>
<li data-xf-list-type="ul">D4 / D2</li>
<li data-xf-list-type="ul">Fs. 32.5 / 31.7 hz</li>
<li data-xf-list-type="ul">Re 8.0 / 4.0 ohms</li>
<li data-xf-list-type="ul">Qms 4.22</li>
<li data-xf-list-type="ul">Qes 0.45 / 0.43</li>
<li data-xf-list-type="ul">Qts 0.44 / 0.41</li>
<li data-xf-list-type="ul">Cms 0.15 mm/N</li>
<li data-xf-list-type="ul">Mms 212.6 / 210.5 gr</li>
<li data-xf-list-type="ul">Bl 16.3 N/A</li>
<li data-xf-list-type="ul">SPL 86.1 / 86.8 dB</li>
<li data-xf-list-type="ul">VAS 14.1 L</li>
<li data-xf-list-type="ul">SD 320cm^2</li>
<li data-xf-list-type="ul">Xmax 23mm</li>
<li data-xf-list-type="ul">RMS 950 watts</li>
</ul>Only down side I see is that i wont be able feed the ssd it&#039;s full rms off the m2000 if the birth sheet is to be believed but i have seen them clamp tested at over 2500. So the ssd looks slightly better for sealed with the updated specs but will I have the power to use it to it&#039;s&nbsp; full potential/surpass the gcon ?</blockquote>

[QUOTE="Crsracing, post: 8700979, member: 678990"] That's what everyone (including fi) said go 2 10's for output so its between the gcon and ssd. I got the specs from them for a ssd with the high qts soft suspension and high xmax options they didnt say how the new qts affected the qes/qms so I just plugged the new specs into there chart. Ssd Coils DUAL 1 | DUAL 2 FS Fs: 31 Hz | 31Hz RE 0.75| 1.5 QMS 5.13 | 5.13 QES 0.36 | 0.36 QTS 0.48 | 0.48 MMS 279g | 285g CMS 0. | 0. SD 310cm^2 | 310cm^2 VAS 15.1 l | 15.1 l SPL 83.1dB | 83.1dB BL 17.11 N/A | 24.3 N/A XMAX 30+mm (One Way) RMS 1500W Gcon [LIST] [*]D4 / D2 [*]Fs. 32.5 / 31.7 hz [*]Re 8.0 / 4.0 ohms [*]Qms 4.22 [*]Qes 0.45 / 0.43 [*]Qts 0.44 / 0.41 [*]Cms 0.15 mm/N [*]Mms 212.6 / 210.5 gr [*]Bl 16.3 N/A [*]SPL 86.1 / 86.8 dB [*]VAS 14.1 L [*]SD 320cm^2 [*]Xmax 23mm [*]RMS 950 watts [/LIST] Only down side I see is that i wont be able feed the ssd it's full rms off the m2000 if the birth sheet is to be believed but i have seen them clamp tested at over 2500. So the ssd looks slightly better for sealed with the updated specs but will I have the power to use it to it's full potential/surpass the gcon ? [/QUOTE]

Verification