Reply to thread

Message

<blockquote data-quote="neek804" data-source="post: 5723053" data-attributes="member: 575757">Ok i have a 05 impala w/o bose w/o factory amp and w/o onstar i was told i need the GMOS-01 harness so i can retain the chimes so i got it and started the wiring process when i notice it has 4 rca cables and i also noticed that the RCA cables were the speaker wires together so i cut the RCA connectors off and connected the speakers wires to the right colors so so when i finished the wiring process i reconnected my battery and turn the car on and the aftermarktet radio(pioneer deh 2000mp) wont turn on i dont understand why and i just was working in my last car i checked all the car fuses and the fuse on the deck but no luck i wired all the colors except the Dimmer, illumination/dash light, mute, and its a blue/pink,green/purple. and this deck requires the ground to touch metal so that is also done but NO POWER.....What am i doing wrongO and when it was all wired i tested and didnt hear any chimesThis is how i did the RCA cord<a href="http://img129.imageshack.us/img129/2577/img0069.jpg" target="_blank">http://img129.imageshack.us/img129/2577/img0069.jpg</a></blockquote>

[QUOTE="neek804, post: 5723053, member: 575757"] Ok i have a 05 impala w/o bose w/o factory amp and w/o onstar i was told i need the GMOS-01 harness so i can retain the chimes so i got it and started the wiring process when i notice it has 4 rca cables and i also noticed that the RCA cables were the speaker wires together so i cut the RCA connectors off and connected the speakers wires to the right colors so so when i finished the wiring process i reconnected my battery and turn the car on and the aftermarktet radio(pioneer deh 2000mp) wont turn on i dont understand why and i just was working in my last car i checked all the car fuses and the fuse on the deck but no luck i wired all the colors except the Dimmer, illumination/dash light, mute, and its a blue/pink,green/purple. and this deck requires the ground to touch metal so that is also done but NO POWER.....What am i doing wrong O and when it was all wired i tested and didnt hear any chimes This is how i did the RCA cord [URL="http://img129.imageshack.us/img129/2577/img0069.jpg"]http://img129.imageshack.us/img129/2577/img0069.jpg[/URL] [/QUOTE]

Verification