Recent content by vampizhere

Ok dont laff. I have a 77 Plymouth Volare with a 318. It started running hot the other day so i changed the thermo, water pump and clean out the whole system. but when it got hot it started idling real bad like it had a huge cam in it. I messed with the carb adjustments and got it idling a bit...

Ok so apparently changing my inline fuse with one that is blown doesnt work either lol. They both looked good so i just assumed that they were. I guess I just learned how looks can be decieving. Now the amp works again with a new fuse. Thanks for the help.

yep thats right.

Ok so i check the wires from the battery to the amp and im gettin power of 14 on my multimeter. The fuses are all good cause i switched them out. I have good ground. When i plugg in the ground and the positive wire and check them together hooked up i only get .6. Its a new amp and I took all...

I turned my stereo on this morning and my subs didnt work. Turns out my power wire fell out of the connection somehow. So I took out my inline fuse next to my battery and hooked it back up and it worked fine. I got out of school and turned it on again and the same thing happened. So i changed...

Ok another quick question again. Since I have alrdy wired them up like the first pic, and they are DVC 4 ohm subs, What is the ending ohms going to be? For my calculations I think that they are still at 4 ohms, so does that mean that im running the said 400+ rms to the subs, so about 200 rms per...

Yeah I alrdy have them set up like pic one but I havent set my gains yet so that might be it. I'm gonna have to figure out how to do that. Thanks for the help guys.

Ok, so I am going to paste a few pics on how i should wire these things up and someone plz tell me which one to do plz. Yeah I just checked the link and the numbers on top or the site are messed up. If u scroll down a bit it gives you the right numbers on rms and peak.

I am running 2 RE 10's with this amp. http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/1330811/vpcsid/0/SFV/30046 would it be better to run them in series or parralel? they are DVC 4 ohm. I hooked them in series and bridged the amp but they dont sound any louder or bassier then...

I just built a box today for my 2 10's in an old ford truck and it was my first time. I wouldnt say i did the best job but I didnt do the worst one either. For my cuts i actually used a sawzall for the holes and it turned out great. Just took it nice and slow and sure i cut a bit out of the...

Ok so I went with 2 RE10's and they should be getting here this week and I need to build my box. I called RE and asked what I should have for airspace per sub and they told me that they make boxes with .6 cu per sub in a sealed box, which im making. But on the website it tells you for SQ to go...