Recent content by theFBI

Do you think the factory ground could have a short in it after the car is turned... I had a problem wiring one of my remote lines before, I wired my remote line to my power antenna, like everyone does, then it stopped working... I looked at the manual, which I won't admit to anyone, and seen...

.... most people design boxes for there subs... Usually working with your maximum trunk dimensions, then going from there. My Trunk was 36x15x13 in my civic. So I'm using 3/4" MDF, I take it of my MAX. dimension. I'll Double the length for the MDF, 36 - (3/4 + 3/4), so 36 - 1 1/2" = 34 1/2"...

ya kinda lose me at the end... Let's just work with a Round port for the time being. Where does: 40sq" come from. I have my newly designed box like this: 4" port at 5.86" long, tuned for 38hertz. (It's an SPL sub) Encluse size is: 2.67cu ft. (2.5 plus Sub Displacement, 0.17) Round Port...

This is My Subwoofer... ( and actually the brand that I sell ) VW12.2D Specifications Power RMS : 1600W Peak Power : 2400W FS : 25.61Hz Qts : 0.39 VAS (litres) : 38.17 Xmax : 16mm Sensitivity : 83.2dB Magnet Wt. : 200oz Mtg. Depth : 7.125" Mtg. Hole Dia. : 11.25"...

Getting busy at work... I tried to add Trixter to msn for help, but haven't seen him online. Feel free to help: spyder_crazy [AT] hotmail.com You don't need to know much about programing, just math...

that sounds like your POWER wire is being grounded out, try directly running a wire from the battery to it. if it doesn't do it, then you know to replace a wire in your previous setup. volt testers are always handy too.

I've seen it grounded to the seat belt, wasn't a bad Idea. Think of it this way... The thicker the steel/metal, the better! Usually, if there's a big bolt, or nut, that ways considerably more than an adv. 12mm bolt, it's going to be a good ground. Some good places: - Spare Tire mounting...

Great Points Trixter! Most of the Code is actually in the box in the volume Calculator lol, making the box move. I'm not entirely in the mood to do that for the Box Builder, however, I totally understand your point! So I will draw the pieces you need, but they won't be ratioed(sp?) to the...

Hello and Welcome to my post! Has anyone ever gone to get help for a sub enclosure, and had NO luck? I took time outta my busy life and created the Volume Calculator and Sub Box builder! It's not the best piece of machinery, yet. However I'm still working on it! I need people to test this...

SOLD

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=5873298692 Check it out! -Brian

How much for the Remote? Bump for shiny objects.

The Smaller the ga. # the larger the inside wire. I'm running voodoo hex zero ga. welders use 00 for arcwelders. :| Running about 4600 peak watts(amps), and about 2100 rms. -Brian

No Sorry, for each.

No question! And the quality of them... I like this sub better than my Eclipse Aluminum... not to mention it was much louder, and able to go lower... now bumping voodoo warrior series, being a voodoo dealer and all I thought support my product would be a better idea lol.