Recent content by T-Roy31

HAHAHAHAHAHA :laugh: I lol'd at the funky pup 18, not what I was expecting at all!

I appreciate all the help Linkz! Hahaha I ended up building a box this afternoon though, and ended up using a very similar design to your last one. It's 31x14x19, 3.0cubes tuned to 34.2hz Just got to cut out the holes for the subs and a couple other things tomorrow and it's done! Would have...

Nothin wrong with those rims man! $150 FTW! Black on Silver is HAWT! Sure they're cheaper, but ****, for that price you cannot go wrong...

Ahhh what do you mean with 1/2" port walls? What if I use 3/4" MDF only, that's all I've got... And I don't quite understand how I'd build that? I find it sooo much easier if it's laid out like subwoofertools or RE's box calculator.

Fack. Okay, so if I've got about 50 or so of port area, is that going to be a big difference from 20 some? And what if I'm a over 3 cubes, like towards the 3.5 range just so I can get more port area? EDIT* What I'm looking at now, is 3.3cubes tuned @ 34.8hz with about 54 for port area. ??

Edited my last post... So this should be sufficient? You think I'll be happy with it, and compared to my Type X?

Wow... So what the hell am I looking at for getting 140db's? Or am I just retarded... My Type X 12 in 3cubes tuned to 30 was pretty loud, this setup should be louder, shouldn't it? Fawk I have sooo much to learn. So is flat response good? And how does this look, this is ~3cubes tuned at...

This is confusing... So you're saying it's not going to be loud then? I will see ~120db's on the meter? Or what? Sorry I'm just not great with this whole part of car audio lol. Flat response meaning what? Btw, man I cannot thank you enough for the help you've given me! *EDIT* I notice on...

Holy chit. Haha I understand not much of that. I do have WinISD, but not a clue how to use it. I have 1000rms from an Alpine MRDM1005 @2ohms. So basically if I tune it to about 34-35hz I should get the best of musical and SPL? Do I have to stick with the 3cubes for best results? *EDIT* I'm...

Sorry, it's a Kaption SPL12 (2 of them). Dual 2ohm model. Here is a PDF with listed specs! http://www.kaptionaudio.com/manuals/SPLManual.pdf

Of Fs in regards to subwoofers... Basically, if my subs have an Fs of 37, it would not be wise to put them in a 4 cube box tuned to anything lower than that # of 37hz?? What happens when you do that? Also, how does size (cubes) affect tuning/sound/performance of woofer. Say, a 4 cube box tuned...

Wat. Wrong thread mane... :laugh: *EDIT* So with new dimensions in the RE box calculator, 33x22x17. I end up with this: Any suggestions??? I'm STILL wondering about the Fs of the sub and tuning, can someone elaborate on this PLEASE!?

***EDIT*** Took some more measurements, and even with the box tilted downwards (the front) I can get 33" long, 22" deep, and 17" tall! Max. Well see I would have more room but my problem lies in the design of my car! The hatch window comes downwards, and at the bottom is the little housing...

Can someone please help me out? I got a sheet of MDF today, and have just tomorrow to build something until my next days off!

Replaced the Type X 12 in 3cubes tuned to 30hz with 2 Kaption SPL 12's... Need to build myself a good box! Gonna do the typical slot port back/subs back design, but subwoofertools is down and can't seem to find anything of the sort!!! I am not so great with the math and formulas otherwise I'd...