Recent content by SI<mr>11

Has anyone had any problem with the screw in battery posts on the Kinetik HC1400 batteries? My problem is that I currently have KnuKonceptz positive and negative battery terminals connected to my OEM battery. I tried to connect them to my newly purchased Kinetik 1400 and they didn't fit. THe...

didn't think about that. makes sense. thanks

No problem. Got some of my own and they are great

Thanks for the invite.....but I am already a member. Different screen name though

How reliable are the voltage readings through my head unit (Pioneer DEH-P6800MP)? I have done the big 3 with 1/0 guage on my 2006 Civic SI and the reading I am getting through my HU doesn't go above 14.1v and drops down to 13.7-13.8 after driving for more than 5 minutes. I would expect around...

KnuKonceptz.com

Just some smaller things that might help out........ zip ties, loom, and heat shrink tubing to protect the wires. size of fuse would depend on how many amps your alt puts out. If it's stock, probably won't need more than 120a fuse for now. If you are upgrading your alt., you could just match...

http://www.knukonceptz.com I just got a couple of the 120A mini ANL's. Only $1.50/piece. I don't know where you could get them in store..... good luck

Damplifier, RAAMmat BXT, eDead. Those are all butyl-based. If you really want to go cheap you can get FatMat, or asphalt deadener at your local harware store. Wouldn't suggest it though. And you should estimate high. eDead is the only one you can buy by the ft^2. Damplifier you can get in...

Exactly what I said. $12/piece x 2 = $24 (plus $5 shipped). So, about the same price either way you slice it.

Knu's are really good. It's what I have. And they sell for $12/piece on Knu's site, so unless that $25 is shipped, it's the same......and even then, the price difference is going to be about $5.

I would probably go with the 250a fuse if you are running 1/0 guage wire. You can get it here www.knukonceptz.com As far as the dist. block with or w/out fuses is really up to you. If you go dist. block thats not fused.....you should in-line fuse both. Again, you can get all the stuff at...

So, what type of speakers did you install? And how big of spacers did you need? I have some Boston PRO60's that are going to go in soon, you think I'll need spacers as well? Thanks.

^^^^ .........x2 It's a long read, but it covers almost everything you can think of

Thanks for the link. I still haven't found anything yet.....but will keep looking. I actually just ordered a bunch of wire/fuses/etc from Knu. I got the Kolossus, but am sure that the KLM would work just as well.