Recent content by Ritter420

The Remote wire is jumpered, not coming from the deck. The main (front) fuse is NOT blown. Im leaning more and more towords the diode problem, I need to find time to open it up and check the dioides... Because honestly, other then that I have no idea what it could be. The only reason i think...

Honestly i dont think its the RCA wires.

Ground is secure. Power wire might have some issues, there might be a short in the power wire from being smashed in the door though, who knows. Its nonsense. I'm in class right now, i'll check when im out. What do u personally think the problem is from what i described?

Any chance that is what the problem is? That i shorted out the power wire from smashing it in the door? I mean it has been there for 2 years...

I'll open the amp up again today after i go to class. Nothing in there was burnt, so i didnt think of going too in depth. I'm so sick of this mess. Also, Car_audio11, I did check the fuses again, they are fine. I guess I should also mention this... -My RCA's were all ****ed up and the Remote...

Hey guys, I thought I'd try to make this organized for you and easy to help me diagnose this problem. Equipment: Pioneer HU, Memphis 1000-D amplifier, Oz Audio 'Matrix Elite' 15" Problem: Amp goes from power to protect and back to power everytime the sub goes to hit, it does it rapidly. It's...

You mean a DVOM? (Digital Volt ohm Meter) How exactly do i go about this? Have the sub out of the box unhooked, put positive lead into the + terminal, Negative lead into the - terminal, do that for each side since it's a D4? This should be on "OHMS" correct? and should be 4ohms for each?

Ok, so I checked my wiring, re-did my ground... No problems that were visable. Any other idea's what this crazyness could be? I'm at a complete loss.. Amp goes from power to protect everytime the sub goes to bump... the sub makes a popping/super distorted noise... but it doesn't make a...

Alright thanks guys, I'll check all the wiring today. It's a possibility that my power wire is cut or somthing, so i'll check it out. Any other problems ya'll see it could be? Because im about 99% sure that the sub is fine, because i dont see how a 1000W amp could blow a 5000W sub. The amp just...

Ok, so i have a 5000w Oz Audio sub hooked up to my Memphis 1000-D. It's been working perfectly fine for the past 2 weeks and last night I popped my fuses in my amp, they were 40A. Replaced them with some 40. I went to bump and now the sub makes a clicking noise (coils are intact, i checked them...