Recent content by Richc1500

Ok i fixed the problem the video cable that came with the camera was to thin of a cable, so i tried a video cable for home theater it worked but was getting some interference line so as a last ditch effort i ran some rg6 and used some RCA adapters works great now no interference at all crystal...

I double checked all of the connections. i soldered them all when i installed it but i checked them any way in case there was a cold solder connection but everything was fine tested with a multi meter have a good ground 12v at the camera and 12v at the head unit backup cam wire when the truck is...

Ok I have a xo vision xod1752bt receiver with 6.2" tft I installed it in my 1996 silverado standard cab I purchased a HDE backup camera I have it wired as fallows Positive wire from the camera tied in to the green wire at my tail light for the reverse lights Ran another positive wire from the...

I have it wired to the reverse wire

I have it wired to the reverse wire at the drivers side tail light going to the trigger wire on the receiver had the camera pos wired there to but it did the same thing so i wired the camera wire to direct power from the igniton and still does it i thought maybe the head unit was bad to i took...

I just put in a 6,2" touchscreen stereo in my truck everything works great except that the backup camera will work when the ignition is in the on position but if i start the truck and go in reverse i have no picture just the graph on the screen i get a good picture if i just turn on the ignition...