Recent content by remltr

you guys RULE! Thanks for the info!

so If I use their port calculator. I just drill a hole and install?

Anyone?

OK,here it goes. A 1.27^3 gross internal volume box with 1-10" type r. Fb 36 Hz. A port with a diameter of 2" and 5" long will give me 36Hz? Using the carstereo link it told me that I need a minimum diameter of 5.79" and it would be 50.52" long? Is it as simple as putting a port that is 2" in...

With the 2 type r's wired for 2 ohms and the amp putting out 600x1@2ohms Is this amp enough? I don't need brain rattling bass just good clean sound.

I found a company called Audio Enhancers that make 2 versions of a box for my car. One box has .89ft^3 per sub and the other has 1.27ft^3 per sub. I spoke with a rep from the company and the larger box has some room for porting. These #'s are pretty close to what Alpine recommends. Now, sealed...

I just need to know: 1: Can the ft^3 be off and not affect SQ drastically. 2: Do the speakers need to be seperated or can they share the 1.3ft^3. Which is better for SQ?

mounting depth seems too shallow. "easily modified to 6" I need,according to Alpine 6.8" Thanks for the link though! Anybody?

Hey guys, just had a quick question. To those of you who own a camaro,you know that space is at a premium. I have 2 SWR-1042's that I am putting into the car. Alpine recommends a .65ft^3 per sub in a sealed enclosure. I am going to attempt to build it myself. Now the questions... 1: Do the...

without putting a second mortgage on my house, what brand 6.5 component would you recommend with this amp set-up 40x4 rms?

Wanted some recs on a good sounding pair of 6x9's or other size/component speaker for the sails panels in my camaro. I have a set of sony xplode 6x9(they were free but sound like ****) running of an Alpine mrp-f250. Got a set of infinity 4x6's in the front that sound good. I have plenty of bass...

hello, New to the forum,lots of great info here! This probably has been beaten to death but here it goes. I have a jvc kd-lh910 HU. Alpine mrp-f250 4channel and an mtx 3001. Alpine is running 2 4x6 plates in the front and 2 6x9's in the rear.MTX is bridged running a single Alpine 10"type R in a...