Recent content by RCHB

heres my setup in my s2000. a little overkill maybe(12w7). just finished the box, need a HU first to hear it. i let you guys know if i think convertables really do **** for systems, i like to learn from first hand experience.

i might just be doing that(round pvc ports). but on that site that i listed, it says the minimum diameter i sould be using is 4.7 or something. when i try to calculate port length, its incredably way too long. cant i just use a 2" diameter pvc pipe? the length is going to be less than 10 inches.

i have about 1 ft^3 for one 10" jl w3v2. its probably a little less, but im going to stuff a little polyfill. i want to tune to 30-33 hz. but how to figure out the length of the port is killing me. can someone help me out. i want my slot port to be 8"X1" or if anything else that is more...

2 JL W3V2 dual 2 ohm. i wired them series parrallel making the ohm load to the amp 2 ohm. i just checked if eveything works again and it does, so i set the settings a little back just in case they were too high. but i bet while im riding later tonight it will happen again. Do you think its...

it does get hot, but a lot of people tell me thats normal. i havent touched the gains or anything else really. someone else tuned the amp for me, i find it too complicating. the power wire im running is a 4 ga. into a 8 ga. with the use of a distribution block.

whenever my amp decides to power the subs i get probably 5-10 minutes of bumping time. Then all of the sudden the subs just cut out. i know its because of the amp cause my brother had the same problem when he had it in his car. i dont know the reason why it does this. its a Rockford fosgate...

The gas tank is directly in back of the rear seats. i wanted to wire them through carpet, but i believe that there is no opening to run the wires. The trunk is like a seperate compartment from the car, it looks as if it was closed off from the passenger area. i could drill a hole through the...

i did the same thing with my 12" L5 dual 2 ohm sub. it was running off a kicker 600x1 at 2 ohm amp. i didnt really know much back then so i wired it in parallel. it was in a ported box and witin 5 minutes smoke came from the port and now its gone. and i didnt have a warranty so i was assed...