Recent content by Radiation

I do like the precision power brand so this maybe a good fit. I am noticing a lack of fuses on the unit, does it come with or need an inline fuse?

I guess if the big 3 helps alot I could stick with the 80 amp fuse I'm running now. Any recommendations at the 80 fuse range or is that still a tall order?

What gauge of wire would you recommend for the big 3?

Whats your recommended wiring size for the big 3? Would 4 be fine or would 1/0 be the go-to? Does anyone have thoughts on that Brutus amp though, or has anyone had any good/bad experiences with Hifonics?

I'll look into the big 3 this weekend, I have plenty of spare 4 gauge wire laying around (or I'll pick up some 1/0). I'm running a XS Power D1200 as my battery, I'd have to image that would be sufficient for the electrical system. Any thoughts on the Hifonics Brutus BRX1116.1D I posted earlier...

Good idea! It's been a while since I've touch the amp settings but I could take a look.

I'd be willing to go up to $200 on the amp but preferably no more than that. I've found a hifonics amp at the link below but I'm not too familiar with the brand. https://www.sonicelectronix.com/item_94822_Hifonics-Brutus-BRX1116.1D.html

I'll have to give that a look into. Currently it's only the headlights but I had more headlight dim plus some internal light dimming noticable at night but caps helped there. Still wanting to pick up a 1000 amp to match the sub but I'm wondering if it'll make the issue worse.

So my current setup is as follows: Precision Power PPI BK650.1D powering a SWR-10D2 - Alpine 10" Dual 2-Ohm Type-R @ 1ohm and Autotek MM1550.4 powering four JBL GTO938 6 x 9-Inch 3-Way @ 2ohm The sub has two Precision Power PPI C.3F in its line All Wiring is 4 gage besides the wiring to the...

Hey all! Looking for a new amp to replace my precision power monoblock. Looking for 1000 watt RMS class D monoblock under 150$ with an fuse rating of 60A total. Currently pulling 140A when my alternator can only supply 120A. Getting some headlight dim and hoping this will resolve the problem...

So I picked up 2 speakers for the cheap from a buddy but I'm unsure how to wire them. I have a 4 channel amp that pushes 375 x 4 @ 2 ohm, the speakers they are running are only 200 watts RMS. The new speakers are only 80 RMS dual voice coil @ 4ohm. I plan on having them only run mid bass as they...

Thanks for the help everyone! looks like a new battery is what I need. If I get one soon I'll post a response.

Instead of wiring it as a second battery I'm wondering if its possible to use it as the main battery (if the dimensions are right, I still have to check)? I dont see any CCAs listed for the battery and that concerns me. Its a Reikken® PB2400 and it looks like it only runs for about $105, or is...

Ok so capacitors are not the solution haha. What should I look for in a AGM battery for my system? how many amps or cca? Also would I just replace my current under the hood battery with the AGM? Would a Reikken® - Energie™ 2400W 12V Power Cell be a viable solution?

So it an agm battery is the best choice it seems. Well buying two of the capacitors is about $120 so a lower end agm wouldn't be out of the questions. I've already checked all my current wiring as well. Why would you recommend an agm battery over a capacitor? What should I look for when...