Recent content by praztek

  1. P

    the pioneer 7800mp

    Nobody Have This HU?
  2. P

    the pioneer 7800mp

    Anyone?
  3. P

    the pioneer 7800mp

    I have two questions about the 7800mp. 1. When HU is on, whether on Tuner or CD the Time characters shuffle though Outlined and Regular Text. Didn't see anything in the menu to have it just stay at one, and not shuffle. Is this by design? 2. I have the power plugged into my accessory on fuse...
  4. P

    why that was nice

    Got the IP Bus Cable with Rca's to work, it was just user error, had to enable Aux in the menu!
  5. P

    Installing Pioneer P780MP On 06 Mustang Tonight

    Think I need to cut the connector off the blue/white wire from the Pioneer harness " to system control terminal of the power amp or auto antenna relay" ,and connect them there.
  6. P

    why that was nice

    I just got the 780mp, and they sent me the IP-Bus cable, one thats in between the aux input jack and jack for the wired remote...It does have a set of rca's on the other end, but I'm thinking they sent me the wrong one? I'm trying to just hook up a ipod via a rca connection in the back, should...
  7. P

    Installing Pioneer P780MP On 06 Mustang Tonight

    Ok, got the sub connection from Crutchfield today, where are those of you tapping the two blue/white-amplifier turn on wires to? 12v Ignition Switched?
  8. P

    Need Advice On Soldering

    Thanks, so the regulator should be fine as well, since it gets hot.
  9. P

    Need Advice On Soldering

    Does the wire need to come into direct contact to the lead? Lets say the lead is covered with solder, can I then re solder the wire over the already soldered lead? & The 5 v regulator in which I'm soldering wires to gets pretty warm, will this damage it?
  10. P

    Need Advice On Soldering

    If I get solder on the lead in which I'm soldering a wire to, can you solder a wire over it? Sorry for the anal question, but I'm new at this. The voltage regulator gets pretty warm, will this damage it?
  11. P

    Need Advice On Soldering

    Great Advice Thanks Everyone!
  12. P

    Need Advice On Soldering

    This something that can be picked up at radio shack? Will it be just as good as soldering?
  13. P

    Need Advice On Soldering

    No need to solder then.
  14. P

    Need Advice On Soldering

    I'm looking to solder a individual wire to each of the leads of a voltage regulator. Any advice in keeping them from touching? See item below. http://www.radioshack.com/product/index.jsp?productId=2062599&cp
  15. P

    Installing Pioneer P780MP On 06 Mustang Tonight

    Yep I agree, going to call them tomorrow. Called 6 shops around here and no one has this connection,very odd.
Top