Recent content by PlumbBill

Not color coded, just labeled sub out 1 & sub out 2. I put in a splitter I might try & hook up both rca's & see what happens though

Well that just *****-------but thanks. If I would have known it was for 2 amps I would have used a single triple shielded rca that I had left over from my last truck--------off to radioshack I go.

Dammit I have a Clarion CZ401 HU & a Kenwood mono class D. Ran RCA's to the back & then it hit me. The head unit rca's said sub out 1 & sub out 2 & the amp has left & right line ins & outs. Do I just hook up & go, or do I abandon one of the rca's & get a...

Thanks, Subs are a whole new ball of wax to me.

Here's my varmint plinker. The pic was from a shoot I did selling the Bianchi vest on Ebay-----had more people interested in the model than the vest. Told em if the price was right I would let the M203 go though. ok, can't figure out how to post a pic...

OK, building boxes for 8" Boston's. Manufacturer recommends .3 cu ft I can build up to .41 cu ft Size constraints are due to box location without altering my rig. I listen to rock mainly, but my musical interest would be described as A-D-D for the most part. I have read that manufacturers...

Good points KHA. I threw in the nec to show the difference between the ratings ;-) I hope my previous post didn't come across as what fuse per IASCA awg recommendations. I was just trying to emphasize the importance of a fuse at the battery & what that fuse actually protects.

Let's start off with powering that amp. YES you need a fuse at the battery, not to protect the amp, but to protect the wire & your vehicle. Without looking up the specs of that amp the simple rule is the fuse at the battery needs to be equal to the sum of all fuses on the amp. In your...

Thanks, that's going to be the plan. I have a 03 F150 ext cab all stock sound today, but hoping by next weekend I'll have my sound system complete. Clarion CZ401 HU going to 2 amps (kenwood pushing the Bostons) & a Jensen 4 channel pushing 2 Rockford Fosgate 6x9 Punch (rear doors), 2...

Uhm, not sure I can do that, I think the subs only have single connections. Here is a link to the specs---- pdf http://www.bostonacoustics.com/PDFs/manuals/G1Man.pdf

Oops, thanks Josh I misread the spec sheet. I don't have these in my hand until tuesday

If I have them set @ 4ohms, & run in parallel that would be 2 ohms, but the amp supposedly pushes 850 watts & my subs are 200w rms each so IMHO 850w pushing into 400w speakers is just asking for a disaster waiting to happen. So it looks like the popular opinion would be to set at 8ohm...

Dang that was hard to get it to post

I typed out a long question & it kept telling me "not allowed"---- hang on I'll see if I can get all the info out   ---------- Post added at 10:13 PM ---------- Previous post was at 10:12 PM ----------   I have 2 Boston 8" G108-44 200w rms & a Kenwood KAC-9102D 500w rms 4ohm / 850w...

OOPS hit the submit button to quick------ I have 2 Boston 8" G108-44 200w rms & a Kenwood KAC-9102D 500w rms 4ohm / 850w rms 2ohm.